Fuel Cell Clarification - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nogaroa4 · 02-08-2007, 03:50 PM

ok I just want to make sure I'm planning this out right. I'm trying to do this as cheap as possible, but also keeping in my mind that I want it to last for another 50 years and I want it to be safe...

I'm looking at Summit's fuel cell with 2" sump. Measuring 25X17X9. Holding 16 Gallons, and having a sender unit of 0-90 ohms.

Then I have a 1970 Chevy 350 that i have to get the fuel to. So I was going to buy sumiits kit, that includes the fittings, fuel pump, fuel filter, and lines.

Does this sound right?

dwcsr · 02-08-2007, 09:45 PM

I have a similar setup on mine. Mount the filter between the tank and pump below the line level. and mount the pump on the frame close to the tank. run the line up and mount the regulator as close to the carb as possible.

entourageguy · 02-08-2007, 10:20 PM

That size tank fits in nicely between the frame rails. How are you going to fill it, thru the bed? This is how I did mine. Had to move the rear cross member back about 4.5" I think to clear the box cross member for the fuel filler. Then I used a billet filler door from a pickup to access it.
Name: rear frame 3-1.jpg
Views: 153
Size: 27.4 KB

Name: rear frame 3-1.jpg
Views: 153
Size: 27.4 KB

Name: fuel filler gate down-1.jpg
Views: 160
Size: 23.2 KB

Brian ..

nogaroa4 · 02-08-2007, 10:32 PM

yeah i was looking at previous post, (mainly where i got the plan and idea). I was going to mount it just like yours. Looks really clean

02-08-2007, 03:50 PM	#1
nogaroa4 Registered User Join Date: Dec 2006 Location: PA Posts: 45	Fuel Cell Clarification ok I just want to make sure I'm planning this out right. I'm trying to do this as cheap as possible, but also keeping in my mind that I want it to last for another 50 years and I want it to be safe... I'm looking at Summit's fuel cell with 2" sump. Measuring 25X17X9. Holding 16 Gallons, and having a sender unit of 0-90 ohms. Then I have a 1970 Chevy 350 that i have to get the fuel to. So I was going to buy sumiits kit, that includes the fittings, fuel pump, fuel filter, and lines. Does this sound right?

02-08-2007, 09:45 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Fuel Cell Clarification I have a similar setup on mine. Mount the filter between the tank and pump below the line level. and mount the pump on the frame close to the tank. run the line up and mount the regulator as close to the carb as possible.

02-08-2007, 10:20 PM	#3
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: Fuel Cell Clarification That size tank fits in nicely between the frame rails. How are you going to fill it, thru the bed? This is how I did mine. Had to move the rear cross member back about 4.5" I think to clear the box cross member for the fuel filler. Then I used a billet filler door from a pickup to access it. Brian .. __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

02-08-2007, 10:32 PM	#4
nogaroa4 Registered User Join Date: Dec 2006 Location: PA Posts: 45	Re: Fuel Cell Clarification yeah i was looking at previous post, (mainly where i got the plan and idea). I was going to mount it just like yours. Looks really clean



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.