fitting on Edelbrock 1406 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

paintpyro · 02-09-2007, 10:53 AM

Well, I'm piecing my truck back together. My carb is dialed in, but the fitting on the back of the carb is halfa@#ed. Does anyone know what size fitting works on the back side of an Edelbrock 1406 carb, currently setup for a connection to the tranny? Its currently just kinda wedged in there, came loose one day and my 400 wouldn't shift.

Thanks

Blue'72 · 02-09-2007, 12:37 PM

That's gotta be a 350 tranny if it's running off of vacuum isn't it? I don't know what size it is for sure, but that's where my power brakes hook up. The tranny can also be ran off the manifold vacuum, but of course you'll need a fitting for that also. Probably the same one needed for the carb..

They usually sell those vacuum line fittings at the auto parts store in the section that has all the chrome dress up goodies. It would be the correct size to screw into the back of the carb.

paintpyro · 02-10-2007, 01:56 AM

ttt

skokie · 02-10-2007, 02:09 AM

I got the one from my 400 turbo from http://www.classicindustries.com/ci_static/index.html

02-09-2007, 10:53 AM	#1
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	fitting on Edelbrock 1406 Well, I'm piecing my truck back together. My carb is dialed in, but the fitting on the back of the carb is halfa@#ed. Does anyone know what size fitting works on the back side of an Edelbrock 1406 carb, currently setup for a connection to the tranny? Its currently just kinda wedged in there, came loose one day and my 400 wouldn't shift. Thanks __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster

02-09-2007, 12:37 PM	#2
Blue'72 Skinned knuckles Join Date: Oct 2006 Location: Longview, Washington Posts: 1,126	Re: fitting on Edelbrock 1406 That's gotta be a 350 tranny if it's running off of vacuum isn't it? I don't know what size it is for sure, but that's where my power brakes hook up. The tranny can also be ran off the manifold vacuum, but of course you'll need a fitting for that also. Probably the same one needed for the carb.. They usually sell those vacuum line fittings at the auto parts store in the section that has all the chrome dress up goodies. It would be the correct size to screw into the back of the carb. __________________ '72 C-10 longbox soon to be short step! '72 Chevelle (sold in January) '07 Sebring '01 Ranger (I've gotta long commute..) If you try to fail, and succeed, which have you done? My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=276904

02-10-2007, 01:56 AM	#3
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	Re: fitting on Edelbrock 1406 ttt __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster

02-10-2007, 02:09 AM	#4
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Re: fitting on Edelbrock 1406 I got the one from my 400 turbo from http://www.classicindustries.com/ci_static/index.html __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.