WTB Bed Toolbox lock WITH KEY for 1970 C20!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LongbedC20 · 02-09-2007, 06:09 AM

Looking for a part for my truck. I can't seem to find a replacement toolbox lock with key. My key if obviously gone and I don't really put anything in the toolbox of my 70 C20 in the fear that it will disappear magically. Hoping someone is parting one out. If nobody has one, maybe you can steer me into the right direction to find one. Doesn't seem as though LMC carries them.

Thanks!

CheySuper8 · 02-09-2007, 11:00 AM

Alex I would think that if you take the lock cylinder out and take it to a lock smith that he can make you a key or key it to your door key good luck . Ken

cheyenne10 · 02-10-2007, 01:14 AM

Aren't these locks the same as the door locks?

**jerry moss** · 02-10-2007, 11:25 AM

Bob,
the lock cylinder itself is the same but the actuating arm is different.

**LockDoc** · 02-10-2007, 12:33 PM

-
Can anyone post a picture of one of the locks with the arm (technical name is pawl) on it, or a picture of the back side of the door with the pawl? Thanks.

70LongbedC20--- If the lock is the same as the door locks I have those with keys but I'm not sure about the pawl....

LockDoc

70LongbedC20 · 02-10-2007, 07:39 PM

Thanks for your comments. I have a lock, but the key doens't fit. I suppose the door locks got changed at one point in time. Especially since a square key opens the doors. Can I just modify the tumblers in the cylinder? That hard?

**BAD4X4** · 02-11-2007, 03:03 AM

You should be able to take the lock down to a locksmith and have a new key made. We've done it several times with things that the key gets lost to.

Worth a try!!

70LongbedC20 · 02-11-2007, 03:45 AM

Thanks BAD4X4! Will give it a try.

02-09-2007, 06:09 AM	#1
70LongbedC20 Registered User Join Date: Feb 2007 Location: France Posts: 53	WTB Bed Toolbox lock WITH KEY for 1970 C20!! Looking for a part for my truck. I can't seem to find a replacement toolbox lock with key. My key if obviously gone and I don't really put anything in the toolbox of my 70 C20 in the fear that it will disappear magically. Hoping someone is parting one out. If nobody has one, maybe you can steer me into the right direction to find one. Doesn't seem as though LMC carries them. Thanks!

02-09-2007, 11:00 AM	#2
CheySuper8 Registered User Join Date: Jan 2006 Location: PA Posts: 69	Re: WTB Bed Toolbox lock WITH KEY for 1970 C20!! Alex I would think that if you take the lock cylinder out and take it to a lock smith that he can make you a key or key it to your door key good luck . Ken

02-10-2007, 01:14 AM	#3
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: WTB Bed Toolbox lock WITH KEY for 1970 C20!! Aren't these locks the same as the door locks? __________________ Bob

02-10-2007, 11:25 AM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: WTB Bed Toolbox lock WITH KEY for 1970 C20!! Bob, the lock cylinder itself is the same but the actuating arm is different. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-10-2007, 12:33 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,771	Re: WTB Bed Toolbox lock WITH KEY for 1970 C20!! - Can anyone post a picture of one of the locks with the arm (technical name is pawl) on it, or a picture of the back side of the door with the pawl? Thanks. 70LongbedC20--- If the lock is the same as the door locks I have those with keys but I'm not sure about the pawl.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

02-10-2007, 07:39 PM	#6
70LongbedC20 Registered User Join Date: Feb 2007 Location: France Posts: 53	Re: WTB Bed Toolbox lock WITH KEY for 1970 C20!! Thanks for your comments. I have a lock, but the key doens't fit. I suppose the door locks got changed at one point in time. Especially since a square key opens the doors. Can I just modify the tumblers in the cylinder? That hard?

02-11-2007, 03:03 AM	#7
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: WTB Bed Toolbox lock WITH KEY for 1970 C20!! You should be able to take the lock down to a locksmith and have a new key made. We've done it several times with things that the key gets lost to. Worth a try!! __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

02-11-2007, 03:45 AM	#8
70LongbedC20 Registered User Join Date: Feb 2007 Location: France Posts: 53	Re: WTB Bed Toolbox lock WITH KEY for 1970 C20!! Thanks BAD4X4! Will give it a try.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.