torque thrust "d" s on a step side ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fnoblitt · 02-21-2007, 02:56 PM

anyone running the american racing torque thrust d wheels on a stepside ? i'm thinking they would look cool on my 70. what is the widest wheel for the rear ?

**slomotion** · 02-21-2007, 03:13 PM

I'm running them on my '80 stepside, IMO they make the truck! I'd post a pic, but it's winter up here and I've got my winter wheels on.

I'm not sure of the widths, but they're in the Summit catalog (where I got mine). They are just a good looking timeless wheel, you can't go wrong with a set!

**uncle** · 02-21-2007, 04:14 PM

I would say a 12" on the rear with the right back spacing.

fastwillie 696969 · 02-21-2007, 04:27 PM

i got 10 inch wheel on the rear

Bowtie67 · 02-21-2007, 05:07 PM

Here is a pick of mine before I narrowed and went to 12" TQ Thrust on the rear, these are 10" rear and 8" fronts.

http://67-72chevytrucks.com/vboard/s...d.php?t=104204

whatnow123 · 02-21-2007, 05:53 PM

Quote:

Originally Posted by Bowtie67

Here is a pick of mine before I narrowed and went to 12" TQ Thrust on the rear, these are 10" rear and 8" fronts.

http://67-72chevytrucks.com/vboard/s...d.php?t=104204

Damn, that is one sweet truck. You did a nice job.

02-21-2007, 02:56 PM	#1
fnoblitt Registered User Join Date: Mar 2002 Location: southern calif.,usa Posts: 200	torque thrust "d" s on a step side ? anyone running the american racing torque thrust d wheels on a stepside ? i'm thinking they would look cool on my 70. what is the widest wheel for the rear ? __________________ 70 c10 stepside ,350v8, m-20 4 speed

02-21-2007, 03:13 PM	#2
slomotion Old Duffer Join Date: Mar 2003 Location: Maine Posts: 1,822	Re: torque thrust "d" s on a step side ? I'm running them on my '80 stepside, IMO they make the truck! I'd post a pic, but it's winter up here and I've got my winter wheels on. I'm not sure of the widths, but they're in the Summit catalog (where I got mine). They are just a good looking timeless wheel, you can't go wrong with a set! __________________ '68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve."

02-21-2007, 04:14 PM	#3
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: torque thrust "d" s on a step side ? I would say a 12" on the rear with the right back spacing.

02-21-2007, 04:27 PM	#4
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: torque thrust "d" s on a step side ? i got 10 inch wheel on the rear __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

02-21-2007, 05:07 PM	#5
Bowtie67 Registered User Join Date: Jan 2004 Location: NH Posts: 2,266	Re: torque thrust "d" s on a step side ? Here is a pick of mine before I narrowed and went to 12" TQ Thrust on the rear, these are 10" rear and 8" fronts. http://67-72chevytrucks.com/vboard/s...d.php?t=104204 __________________ 1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.