HELP...I need a picture of the SBC motor mount towers installed!!!!!

[jugernot]

During assembly my motor looked awefully close to the firewall. We thought that maybe I had the towers on the wrong sides, but after raising the motor and switching the towers, I can't get the three tower holes to line up.

So if anyone has a picture of the towers installed without the motor or even with the motor, I would like to reference them to get mine installed.

[Big Block]

Do you know if your truck was an original v8? You can check buy looking at your vin plate inside the drivers door. If it starts with CCE it was a factory v8. If it is CCS it was a six. If it was a six the mounts would be mounted in the rear position toward the firwall. That puts the dist. very close to the firewall. I have posted pictures of a v8. I it was a six and you want to mount it in the v8 position you have to move foward the trans mount, trans linkage and the drive shaft has to be replace with a longer one. Good luck I hope this helps.

[jugernot]

Well I have figured out my delima, I have a pair of inline six motor mounts. Thanks for the pictures they really helped me solve the problem.