67 C-10 ignition bezel missing parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HOOPTY67 · 02-22-2007, 01:36 AM

where can i buy the part that goes on the back side of dashboard and holds the ignition switch to the small bezel on the front side of the dashboard?

i know there's two bezels, a large one and a small one and my truck has the small bezel. the large one won't fit.

anyone got one they can part with?

thanks!

-mike

ks147j111928 · 02-22-2007, 01:41 AM

I have a small one in my 67 parts truck, will get to it later in the week. You need the whole ignition switch or just the trim?
It comes with a cab and frame, har har...

Dan

brak · 02-22-2007, 01:50 AM

Brothers has one for 4.95, and they are site supporters which is a plus.

http://brothersonlinestore.com/prodi...number=BR10028

sneakysnake · 02-22-2007, 10:44 AM

Not positive but I believe 60-66 used the small ones.

**Boog** · 02-22-2007, 07:54 PM

Sounds like you are needing the spacer? I don't have an extra but I will tell you some of the aftermarket spacers won't fit right. I bought my new one from a local chevy parts guy and it tilted the switch over just enough the bezel would not thread onto the switch. I dug around and found my original one and all is well.

**John Fabris** · 02-22-2007, 08:58 PM

Here is a link to the parts in FAQ so that you guys can see the difference of what part hoopty is looking for. It is the 67 spacer that he is talking about. These are not reproduced.

Link to FAQ POST

Bob Moore · 02-22-2007, 11:41 PM

John Fabris is correct. That part has not been repopped. Junk yard, swap meet, or board member only.

brak · 02-23-2007, 12:08 AM

Quote:

Originally Posted by John Fabris

Here is a link to the parts in FAQ so that you guys can see the difference of what part hoopty is looking for. It is the 67 spacer that he is talking about. These are not reproduced.

Link to FAQ POST

the part i listed above is marked 67 only on brothers site, and every other site i've seen...

HOOPTY67 · 02-23-2007, 01:01 PM

thanks for the info.
brother's site shows a part number for the spacer but the photo is wrong.

http://brothersonlinestore.com/products.asp?dept=587

guess i'll call them and see if they really do have the spacer. if not, hopefully one of you has a spare they can part with.

HOOPTY67 · 02-23-2007, 01:07 PM

just called and although they list the part on their website with the wrong photo, they dont carry the '67 small diameter spacer. So i'm SOL unless someone else had got one. HELP! LOL

HOOPTY67 · 02-24-2007, 04:03 PM

bump...anyone got the small spacer for a '67 C-10 ignition switch they'd like to sell???

02-22-2007, 01:36 AM	#1
HOOPTY67 Registered User Join Date: Nov 2005 Location: california Posts: 155	67 C-10 ignition bezel missing parts where can i buy the part that goes on the back side of dashboard and holds the ignition switch to the small bezel on the front side of the dashboard? i know there's two bezels, a large one and a small one and my truck has the small bezel. the large one won't fit. anyone got one they can part with? thanks! -mike

02-22-2007, 01:41 AM	#2
ks147j111928 ASE Certified Spoon Operator Join Date: Oct 2006 Location: Colorado Springs, CO Posts: 157	Re: 67 C-10 ignition bezel missing parts I have a small one in my 67 parts truck, will get to it later in the week. You need the whole ignition switch or just the trim? It comes with a cab and frame, har har... Dan __________________ My six is bigger than your eight 67 K20 292 +.060" SM465 NP203 3.73s 86 4Runner, the daily on 31s 85 4Runner, the wheeler on 38s 92 x-cab truggy project for 2017... tons and 42s and V8 power

02-22-2007, 01:50 AM	#3
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: 67 C-10 ignition bezel missing parts Brothers has one for 4.95, and they are site supporters which is a plus. http://brothersonlinestore.com/prodi...number=BR10028 __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill Last edited by brak; 02-22-2007 at 02:07 AM.

02-22-2007, 10:44 AM	#4
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: 67 C-10 ignition bezel missing parts Not positive but I believe 60-66 used the small ones.

02-22-2007, 07:54 PM	#5
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,535	Re: 67 C-10 ignition bezel missing parts Sounds like you are needing the spacer? I don't have an extra but I will tell you some of the aftermarket spacers won't fit right. I bought my new one from a local chevy parts guy and it tilted the switch over just enough the bezel would not thread onto the switch. I dug around and found my original one and all is well. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

02-22-2007, 08:58 PM	#6
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: 67 C-10 ignition bezel missing parts Here is a link to the parts in FAQ so that you guys can see the difference of what part hoopty is looking for. It is the 67 spacer that he is talking about. These are not reproduced. Link to FAQ POST __________________ John Fabris 67 C10 SWB

02-22-2007, 11:41 PM	#7
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: 67 C-10 ignition bezel missing parts John Fabris is correct. That part has not been repopped. Junk yard, swap meet, or board member only. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

02-23-2007, 01:01 PM	#9
HOOPTY67 Registered User Join Date: Nov 2005 Location: california Posts: 155	Re: 67 C-10 ignition bezel missing parts thanks for the info. brother's site shows a part number for the spacer but the photo is wrong. http://brothersonlinestore.com/products.asp?dept=587 guess i'll call them and see if they really do have the spacer. if not, hopefully one of you has a spare they can part with.

02-23-2007, 01:07 PM	#10
HOOPTY67 Registered User Join Date: Nov 2005 Location: california Posts: 155	Re: 67 C-10 ignition bezel missing parts just called and although they list the part on their website with the wrong photo, they dont carry the '67 small diameter spacer. So i'm SOL unless someone else had got one. HELP! LOL

02-24-2007, 04:03 PM	#11
HOOPTY67 Registered User Join Date: Nov 2005 Location: california Posts: 155	Re: 67 C-10 ignition bezel missing parts bump...anyone got the small spacer for a '67 C-10 ignition switch they'd like to sell???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.