|
02-26-2007, 07:56 PM
|
#1 |
|
Dave's not here, man
Join Date: Jun 2004
Location: Winder, Georgia
Posts: 2,000
|
Carb. Inlet Line
I am trying to find an inlet fuel line for my 2 bbl (line from pump to carb) but I can't find any companies that carry them. Motor was a '68 307, now an '86 305. Anyone have any suggestions??
__________________
- 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 |
|
|
|
02-26-2007, 08:09 PM
|
#2 |
|
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: Carb. Inlet Line
bend it your self. i bought a 4 foot line at autozone and went at it. had to cut one end and use my double end flaring kit. i would have rather had regular steel color but this won't rust
 i would be happy to take a picture of my tubing bender if you would like 
Last edited by rage'nrat638; 07-12-2007 at 06:56 AM. |
|
|
|
|
02-26-2007, 08:33 PM
|
#3 |
|
Dave's not here, man
Join Date: Jun 2004
Location: Winder, Georgia
Posts: 2,000
|
Re: Carb. Inlet Line
Please do, and thank you very much in advance. That looks exactly like the original! You did an awesome job with it. Also, can the threaded ends be found at the hardware store?
__________________
- 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 |
|
|
|
|
02-26-2007, 09:04 PM
|
#4 |
|
Registered User
Join Date: Feb 2007
Location: Lexington Park, MD
Posts: 47
|
Re: Carb. Inlet Line
It should come with the line, but if its not the same threads then they usually carry them in the back. sometimes hard to find. but the threads are very fine is all i can say and usually fit a 5/8 wrench.---Andy
__________________
1972 Chevy Truck 350ci/th350 Auto. Daily Driver 
|
|
|
|
|
02-26-2007, 09:34 PM
|
#5 |
|
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: Carb. Inlet Line
here we go i went to the garage and snapped some shots
the line was 3/8 x 60" long and came with the fitting already. the tubing bender i bought at home depot.  it bends 3 sizes Last edited by rage'nrat638; 07-12-2007 at 06:56 AM. |
|
|
|
|
02-26-2007, 10:22 PM
|
#6 |
|
Dave's not here, man
Join Date: Jun 2004
Location: Winder, Georgia
Posts: 2,000
|
Re: Carb. Inlet Line
Thanks again for taking time out do that. I'll have to get one of those and start bending. The one I have is junk and kept kinking the line. Although, there quite possibly could have been a short between the floor and the bender!
__________________
- 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 |
|
|
|
|
02-26-2007, 10:45 PM
|
#7 |
|
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: Carb. Inlet Line
well you see i bought 60" of line. i had pleanty in case i !!! well if i needed two
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
