WIW 67 & 72 long step parts trucks?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

byrd · 02-09-2007, 11:29 PM

I went and looked at two pretty rough long step trucks today, I haven't never seen one in person and got to look at two today

Anyway both a v8 3 on the tree no power basic trucks. The 67 is suppossed to be his granpas truacka nd been in the family since new and the milage (I didnlt look) is sadi to be original. The cab is a small window 6 lug has decent rear fenders and the front fenders are savagable, doors are iffy, the grill is pushed in in the center just slightly, and the cab is pretty well shot. The motor knocks, and looks like a 307??, but has a good front bumper and the tailgate looks fair from a glance. THe visor are in the cab is clean although the firewall is pretty rough. The other one is a 72 GMC v8 350 3 on the tree, no power. It is suppossed to run, but needs a carb

says was rebuilt and has about 25-30K on on it. The front clip is pretty nice and it looks like the grill is good and straight, although it has a little indention in the middle in between the middle and lower bar but it looks stock to me, but I don't know. It has 5 lug, disc brakes, fairly new exhaust, but the rear fenders are rusty on the bottom and the door bottoms are mostly gone, but not past where you could patch them and they are the correct 72 doors.I forgot to mention both cabs floor are really rusty and both cabs supports are rusty as well, the 72 has quite a bit of vior area rust as well. Anyway the guy is kinda hurting and I don't need them , but thought I could part them and make a little $$, so what do you guys think they are worth as parts truck? I would really appreciate any input you would like to share.
Randy

byrd · 02-09-2007, 11:32 PM

more pics

1969k10stepside · 02-09-2007, 11:38 PM

Id say no more than $500 for both.Probably worth around $250 a piece.I wish I had my long step bed on my 4x4 still at times.

byrd · 02-09-2007, 11:39 PM

a few more

chevdanbarnett · 02-09-2007, 11:46 PM

if you buy would like to have the linkge from the three on the tree to the trans god buy if you do see some thing i would like

byrd · 02-10-2007, 12:03 AM

Thanks dustin

byrd · 02-10-2007, 12:03 AM

Dan I will keep you in mind for that if I get them
BTW I got you mo to day for the clear lenses and they will ship out tomorrow.

chevdanbarnett · 02-10-2007, 12:27 AM

ok thanks

**special-K** · 02-10-2007, 05:02 AM

I dunno,Byrd.That guy can`t expect to get much out of those.At this point,it`s more of a chore to clear his junk than to gain much in the way of parts.The little knick-knacks that you can sell will only pay for your time.Are any of the rear fenders good?If the`67 d/s is good,I`d buy it.Can you pick parts where they sit?maybe,tell him you`ll give him a % from each part,them help him dispose of what`s left.
I bought a`69 C/20 StepSide this summer.The guy thought it was worth $1,000.He realized he was lucky I was interested and took my $500 offer.I bought it for the bed.It had a cap it`s whole life,so the wood was intact.The paint was original,too.The other things I wanted were the complete PowerGlide set-up and a Dana60 coil-spring rear for a pro-street project.Unfortunately the windows had been left down for years and the floor was way gone.Otherwise,it would have gotten restored.

davidh · 02-15-2007, 05:39 PM

I've bought 2 67s at $300 each and drove them home. $300 to 500 max.

sixtysevengmc · 02-15-2007, 05:58 PM

I'm interested in the 67 complete as it sets

let me know

ks147j111928 · 02-16-2007, 02:36 AM

heck, this seems like a "make one out of two" deal... what the heck?? go for it, long steps are kinda hard to come by. besides, the paint will TOTALLY buff out

...
dan

krue · 02-16-2007, 02:51 AM

I'd offer him scrap metal prices for them (whatever scrap goes for local to you x ~4500# apiece) minus the gas to haul them off. Then you can sell the usable pieces and junk the rest.

**special-K** · 02-16-2007, 07:33 AM

**jerry moss** · 02-16-2007, 07:11 PM

iagree--offer him scrap value minus gas money. those things are way ruffffff

1969k10stepside · 02-16-2007, 07:14 PM

Here in southern Indiana,the going price for a truck like that is a little over a hundred complete or near complete.Last time I scrapped a truck,clean steel was $110 a ton.

byrd · 02-16-2007, 08:28 PM

I just called the scaprers(sp???) and they said $150/ton. So $250 each tops. I don't think he will take that little for them as ya know they are very desirable trucks he said

krue · 02-16-2007, 09:16 PM

**hotrodmtodd** · 02-17-2007, 12:03 AM

Randy,
Please mark me down for the best 2 of the four steps, and the best of the pass. side rear fenders (reasonable to cheap) if you do decide to get them. I hit a HUGE pothole and just about ripped my whole right rear fender off. Have pity on me. hehe Thanks, Mike

smithjm · 02-27-2007, 04:45 PM

I am interested in the GMC radiato support and inner fenders if they are in good shape..but would need shipping to zip code 32505
e mail:james.smith@gbe.com

davidh · 02-28-2007, 02:56 PM

did you buy these after all?

jkaylor68gmc · 02-28-2007, 03:04 PM

I would say 500 for the pair and part those baby's out so that many other trucks can be finished from the sacrifice of two then scrap the rest for recycling.

02-09-2007, 11:38 PM	#3
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: WIW 67 & 72 long step parts trucks?? Id say no more than $500 for both.Probably worth around $250 a piece.I wish I had my long step bed on my 4x4 still at times.

02-09-2007, 11:46 PM	#5
chevdanbarnett Senior Member Join Date: Apr 2006 Location: ohio medina Posts: 451	Re: WIW 67 & 72 long step parts trucks?? if you buy would like to have the linkge from the three on the tree to the trans god buy if you do see some thing i would like Last edited by chevdanbarnett; 02-09-2007 at 11:50 PM.

02-10-2007, 12:27 AM	#8
chevdanbarnett Senior Member Join Date: Apr 2006 Location: ohio medina Posts: 451	Re: WIW 67 & 72 long step parts trucks?? ok thanks

02-10-2007, 05:02 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WIW 67 & 72 long step parts trucks?? I dunno,Byrd.That guy can`t expect to get much out of those.At this point,it`s more of a chore to clear his junk than to gain much in the way of parts.The little knick-knacks that you can sell will only pay for your time.Are any of the rear fenders good?If the`67 d/s is good,I`d buy it.Can you pick parts where they sit?maybe,tell him you`ll give him a % from each part,them help him dispose of what`s left. I bought a`69 C/20 StepSide this summer.The guy thought it was worth $1,000.He realized he was lucky I was interested and took my $500 offer.I bought it for the bed.It had a cap it`s whole life,so the wood was intact.The paint was original,too.The other things I wanted were the complete PowerGlide set-up and a Dana60 coil-spring rear for a pro-street project.Unfortunately the windows had been left down for years and the floor was way gone.Otherwise,it would have gotten restored. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-10-2007 at 09:56 AM.

02-15-2007, 05:39 PM	#10
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: WIW 67 & 72 long step parts trucks?? I've bought 2 67s at $300 each and drove them home. $300 to 500 max. __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.

02-15-2007, 05:58 PM	#11
sixtysevengmc village idiot Join Date: Oct 2006 Location: Barbourville,KY Posts: 178	Re: WIW 67 & 72 long step parts trucks?? I'm interested in the 67 complete as it sets let me know

02-16-2007, 02:36 AM	#12
ks147j111928 ASE Certified Spoon Operator Join Date: Oct 2006 Location: Colorado Springs, CO Posts: 157	Re: WIW 67 & 72 long step parts trucks?? heck, this seems like a "make one out of two" deal... what the heck?? go for it, long steps are kinda hard to come by. besides, the paint will TOTALLY buff out ... dan __________________ My six is bigger than your eight 67 K20 292 +.060" SM465 NP203 3.73s 86 4Runner, the daily on 31s 85 4Runner, the wheeler on 38s 92 x-cab truggy project for 2017... tons and 42s and V8 power

02-16-2007, 02:51 AM	#13
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: WIW 67 & 72 long step parts trucks?? I'd offer him scrap metal prices for them (whatever scrap goes for local to you x ~4500# apiece) minus the gas to haul them off. Then you can sell the usable pieces and junk the rest. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" Last edited by krue; 02-16-2007 at 02:53 AM.

02-16-2007, 07:33 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WIW 67 & 72 long step parts trucks?? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-16-2007, 07:11 PM	#15
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	Re: WIW 67 & 72 long step parts trucks?? iagree--offer him scrap value minus gas money. those things are way ruffffff __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-16-2007, 07:14 PM	#16
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: WIW 67 & 72 long step parts trucks?? Here in southern Indiana,the going price for a truck like that is a little over a hundred complete or near complete.Last time I scrapped a truck,clean steel was $110 a ton.

02-16-2007, 09:16 PM	#18
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: WIW 67 & 72 long step parts trucks?? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-17-2007, 12:03 AM	#19
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: WIW 67 & 72 long step parts trucks?? Randy, Please mark me down for the best 2 of the four steps, and the best of the pass. side rear fenders (reasonable to cheap) if you do decide to get them. I hit a HUGE pothole and just about ripped my whole right rear fender off. Have pity on me. hehe Thanks, Mike __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

02-27-2007, 04:45 PM	#20
smithjm Registered User Join Date: Feb 2007 Location: Pensacola,FL. Posts: 24	Re: WIW 67 & 72 long step parts trucks?? I am interested in the GMC radiato support and inner fenders if they are in good shape..but would need shipping to zip code 32505 e mail:james.smith@gbe.com

02-28-2007, 02:56 PM	#21
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: WIW 67 & 72 long step parts trucks?? did you buy these after all? __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.



Register or Log In To remove these advertisements.

02-28-2007, 03:04 PM	#22
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: WIW 67 & 72 long step parts trucks?? I would say 500 for the pair and part those baby's out so that many other trucks can be finished from the sacrifice of two then scrap the rest for recycling.

Register or Log In To remove these advertisements.