|
03-05-2007, 01:17 PM
|
#1 |
|
68 just like me
Join Date: Feb 2007
Location: canton ga.
Posts: 142
|
carb. i.d.
I picked up a intake manifold for a 1965 283/327 with a cast number 3866922 it was advertised as a intake for rochester / holley 4 barrel but the flange area looks totaly differten than the bottom flanges of the carbs I have been looking at frome the same time frame.where would be the best place to start or cross-reference the part # . thanks for any help I can get.
 
__________________
68 just like me 
|
|
|
|
03-05-2007, 04:08 PM
|
#2 |
|
It's a catastrophic success.
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Re: carb. i.d.
You probably have a square bore carb and a spread bore intake man.they make an adaptor.
http://www.kendrick-auto.com/chevrol...maniflolds.htm |
|
|
|
|
03-05-2007, 05:58 PM
|
#3 |
|
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,719
|
Re: carb. i.d.
Your intake is a 62-65 pass. car. 283 or 327. 4bbl wcfb or 4 jet. Hope that helps you.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
|
|
|
|
03-05-2007, 08:57 PM
|
#4 |
|
68 just like me
Join Date: Feb 2007
Location: canton ga.
Posts: 142
|
Re: carb. i.d.
thanks now that i see the quad intake above I can see that the out side shape is about the same that is what was throughing me off one
__________________
68 just like me
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
