small bend in frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedZ71 · 03-05-2007, 11:28 PM

i was just wondering how big of a pain it is to have a frame straightened? i have a small bend in the end of my frame, right where my bumper connects on the front (likely from a fender bender). its not really bad, but its going to prevent "best" alignment of my bumper when it comes time for a new one (and thus, will prevent me from sleeping soundly at night)

anyone have frame straightening stories to share? big problems, or not a bad operation?

unfortunately, no pics of my bend now, but i intend to have some later.

68shortfleet · 03-06-2007, 01:07 AM

I had the entire front clip of my old honda crx staightened. The lower portion of the front clip had moved 3 inches to the left. Left it with the shop and told him no big hurry. He called me a week later and told me $250 cash.
And everything bolted up perfectly after he was done.
You have described a super easy straightening job, shouldn't cost much.

Jason

stllookn · 03-06-2007, 01:12 AM

I was sliding a rolling bare frame (without engine) around my pasture (on the wet grass) with my Kubota and it got hung up on a stump...bent the frame horn before I could stop...very weak. You could probably bend it back with a big sledge and a few well placed blows.

RedZ71 · 03-06-2007, 08:31 AM

cool, thats what im hoping for. the bend is actually right in the spot where the bolt from the bumper bracket goes into the frame, so yes, it was probably a weak spot that got stressed in a fender bender, and it buckled.

man i just wish i could fast forward time, so that other things of life can be taken care of to clear the way for my full restoration!

arkracing · 03-06-2007, 08:36 AM

Come-a-long (Optional)
Porta-Power (Optional)

A Little heat and a BFH (Big Friggen Hammer) and you should be back in Business. If you Have to heat it - don't get that thing red hot - just a little till it moves for you and don't cool it with water - let it cool on it's own

Being the front horn it should be pretty easy to straighten back out

**special-K** · 03-06-2007, 10:00 AM

Dolly it out,may need heat.

03-05-2007, 11:28 PM	#1
RedZ71 Junior Member Join Date: Jan 2007 Location: Dallas, TX Posts: 246	small bend in frame i was just wondering how big of a pain it is to have a frame straightened? i have a small bend in the end of my frame, right where my bumper connects on the front (likely from a fender bender). its not really bad, but its going to prevent "best" alignment of my bumper when it comes time for a new one (and thus, will prevent me from sleeping soundly at night) anyone have frame straightening stories to share? big problems, or not a bad operation? unfortunately, no pics of my bend now, but i intend to have some later. __________________ Jonathan 2001 ECSB Silverado Z71 1971 LB C10 Custom www.z71silverado.com

03-06-2007, 01:07 AM	#2
68shortfleet Registered User Join Date: Oct 2006 Location: Dundee, Oregon Posts: 311	Re: small bend in frame I had the entire front clip of my old honda crx staightened. The lower portion of the front clip had moved 3 inches to the left. Left it with the shop and told him no big hurry. He called me a week later and told me $250 cash. And everything bolted up perfectly after he was done. You have described a super easy straightening job, shouldn't cost much. Jason

03-06-2007, 01:12 AM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: small bend in frame I was sliding a rolling bare frame (without engine) around my pasture (on the wet grass) with my Kubota and it got hung up on a stump...bent the frame horn before I could stop...very weak. You could probably bend it back with a big sledge and a few well placed blows. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-06-2007, 08:31 AM	#4
RedZ71 Junior Member Join Date: Jan 2007 Location: Dallas, TX Posts: 246	Re: small bend in frame cool, thats what im hoping for. the bend is actually right in the spot where the bolt from the bumper bracket goes into the frame, so yes, it was probably a weak spot that got stressed in a fender bender, and it buckled. man i just wish i could fast forward time, so that other things of life can be taken care of to clear the way for my full restoration! __________________ Jonathan 2001 ECSB Silverado Z71 1971 LB C10 Custom www.z71silverado.com Last edited by RedZ71; 03-06-2007 at 08:31 AM.

03-06-2007, 08:36 AM	#5
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: small bend in frame Come-a-long (Optional) Porta-Power (Optional) A Little heat and a BFH (Big Friggen Hammer) and you should be back in Business. If you Have to heat it - don't get that thing red hot - just a little till it moves for you and don't cool it with water - let it cool on it's own Being the front horn it should be pretty easy to straighten back out __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

03-06-2007, 10:00 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: small bend in frame Dolly it out,may need heat. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.