![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2003
Location: Oklahoma City
Posts: 605
|
Salvage yard score!
Well i have been looking for seats for my '71 for a LONG time. I took some used Ford parts I had at work and took them to my buddy who owns OKC Pick up parts. I took him some running boards, front drivers and pass door glass, and pass power mirror, factory radio. Parts I had laying about for some time, He gave me these seats and I found this column sitting in a 91 van. Don't know if it is even useable looks pretty rough. But i am very happy with the seats, especially for the price! Just got to the the wiring done on the rest of the truck and drop in the new motor and trans. Should have it done and at the board meet this July.
__________________
2008 Ford FX2 Screw 1971 C10 project in shop now! 2004 Pontiac Grandam (wifes) 2000 Cavalier z24 (gas saver) |
![]() |
![]() |
![]() |
#2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Salvage yard score!
Those seats will probably take a lot of rom. If you are 6 foot tall, or real short for your weight... don't expect to be happy with them.
|
![]() |
![]() |
![]() |
#3 |
Oilfield Trash
Join Date: Sep 2003
Location: Raymore, Sk, Canada, Earth
Posts: 3,171
|
Re: Salvage yard score!
I have those same seats in my 72, I'm 6'4, 250lbs, and like them, kinda get sore knees after 3 or 4 hours of driving but thats about it
__________________
14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr. |
![]() |
![]() |
![]() |
#4 |
K5Camper
![]() Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
|
Re: Salvage yard score!
I run the same in my Blazer. Word to the wise, shore up your mounts to the floor for those seats. THe floor wasn't designed for the stress that an integral mounted seatbelt will place on it. I used 1/4" thick plate to distribute the load on mine.
You don't want to have the seat come off the floor with you in it in a wreck..Kind of defeats the need for the seatbelts!
__________________
Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper |
![]() |
![]() |
![]() |
#5 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Salvage yard score!
I've heard a lot of the fleet drivers that come through our shop who drive these new GM trucks, complain about them. We have a few new rail road trucks where they had us remove the seats and install some aftermarket ones when the stock ones were hardly used. And personally, they kill my lower back after just 30 or 45 min driving.
|
![]() |
![]() |
![]() |
#6 |
K5Camper
![]() Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
|
Re: Salvage yard score!
I love mine. I can see with a lot of seat time where the seats can be a pain, but I crank the lumbar up on it and it feels a lot better. I don't always putt around with the lumbar support cranked up, just after long rides or off road. I've found taking my Costanza sized wallet out of my back pocket works wonders too.
My seats are way better than the junk I pulled out thats for sure. (I might have a set of 6 way power units just like those that my dad needs to unload if anybody else is looking. I'm not sure if he got rid of them or not)
__________________
Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2003
Location: Oklahoma City
Posts: 605
|
Re: Salvage yard score!
Well if they don't work for me thats ok i will try something else, couldn't beat the price.
__________________
2008 Ford FX2 Screw 1971 C10 project in shop now! 2004 Pontiac Grandam (wifes) 2000 Cavalier z24 (gas saver) |
![]() |
![]() |
![]() |
Bookmarks |
|
|