need help with vin# - The 1947 - Present Chevrolet & GMC Truck Message Board Network

murphy67 · 03-10-2007, 06:40 PM

my vin#ccs132a...... can't find second c in vin# codes.cab has cab lights and factory shift on floor on 1/2 ton swb frame..help...

williamt · 03-10-2007, 07:23 PM

does it list the same series inside the dash and the drivers door. all I can find is conventional cab 6 cyl. fleetside 1972 from Atlanta.sorry no help you probable already know all that.on a side note my Dad might have built your truck he worked at the atlanta plant maybe I should call him.

Longhorn Man · 03-10-2007, 07:48 PM

ccs132a
The added C is a 72 thing...it means Chevy. If it was a GMC, it would be a T
So you have;
C Chevy
C2 wheel drive
S inline 6
1 1/2 ton
3 i can't remember what 3 is... cab chassis maybe? (does it have a bed on it?
2 1972
A built in Atlanta
Here is our VIN decoder http://67-72chevytrucks.com/Chevyear.html

Longhorn Man · 03-10-2007, 07:49 PM

BTW, There is no way to say fleet side or step side on a chevy VIN.

murphy67 · 03-10-2007, 11:08 PM

thanks longhorn.just picked the truck up today,along with a 70 step side.the 72 is in preety bad shape,not sure if it's worth fixin..have complete floor to get it done.just never seen cab lights and shift on floor in 1/2 ton,also has radio delete.would like to know if it is some special model...cab is not round where cab lights are,has slight risen flat surface..weird...thanks ..

Longhorn Man · 03-10-2007, 11:15 PM

clearance lights were uncommon, but not unheard of on a 1/2 ton, 4 speeds, not uncommon at all. The raised pads you mention, that ensures the lights were on that truck from day one.

03-10-2007, 06:40 PM	#1
murphy67 Registered User Join Date: Feb 2007 Location: kilgore,tx Posts: 20	need help with vin# my vin#ccs132a...... can't find second c in vin# codes.cab has cab lights and factory shift on floor on 1/2 ton swb frame..help...

03-10-2007, 07:23 PM	#2
williamt 68 just like me Join Date: Feb 2007 Location: canton ga. Posts: 142	Re: need help with vin# does it list the same series inside the dash and the drivers door. all I can find is conventional cab 6 cyl. fleetside 1972 from Atlanta.sorry no help you probable already know all that.on a side note my Dad might have built your truck he worked at the atlanta plant maybe I should call him. __________________ 68 just like me

03-10-2007, 07:48 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: need help with vin# ccs132a The added C is a 72 thing...it means Chevy. If it was a GMC, it would be a T So you have; C Chevy C2 wheel drive S inline 6 1 1/2 ton 3 i can't remember what 3 is... cab chassis maybe? (does it have a bed on it? 2 1972 A built in Atlanta Here is our VIN decoder http://67-72chevytrucks.com/Chevyear.html

03-10-2007, 07:49 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: need help with vin# BTW, There is no way to say fleet side or step side on a chevy VIN.

03-10-2007, 11:08 PM	#5
murphy67 Registered User Join Date: Feb 2007 Location: kilgore,tx Posts: 20	Re: need help with vin# thanks longhorn.just picked the truck up today,along with a 70 step side.the 72 is in preety bad shape,not sure if it's worth fixin..have complete floor to get it done.just never seen cab lights and shift on floor in 1/2 ton,also has radio delete.would like to know if it is some special model...cab is not round where cab lights are,has slight risen flat surface..weird...thanks ..

03-10-2007, 11:15 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: need help with vin# clearance lights were uncommon, but not unheard of on a 1/2 ton, 4 speeds, not uncommon at all. The raised pads you mention, that ensures the lights were on that truck from day one. Last edited by Longhorn Man; 03-11-2007 at 12:21 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.