|
03-13-2007, 09:03 PM
|
#1 |
|
Active Member
Join Date: Jun 2005
Location: Idaho
Posts: 263
|
Turbo 350 question
Guys I have a TH350 starting to slip in 3rd gear after it is driven for a while (say 15 minutes or so). I checked to make sure the fluid is good, not burnt and full so nothing apparent so I guess I have clutches on their way out..so the question I have is this. my truck is a 1972 4x4, if I want to pick up a good used one, what is the span of years that they made the TH350 trans with the correct adapter to an NP205 transfer case?
PS- I service the tranny not very long ago, changing the filter, gasket and refilling with fresh fluid. I did notice quite a bit of slude in the pan...bummer. Thanks for your help! Jim |
|
|
|
03-13-2007, 09:11 PM
|
#2 |
|
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,020
|
Re: Turbo 350 question
Any th350 for a 4x4 will work.I took a 2wd tranny and converted it to a 4x4 th350 too.The adapter un bolts from both the t case and tranny,just keep it on the t case and bolt the new tranny up to it.
Last edited by 1969k10stepside; 03-13-2007 at 09:13 PM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
