Question for the 4L60 guys?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**68 Stepside** · 03-16-2007, 06:42 PM

Hey all,

I've found a 4L60 locally for cheap. I've currently got a TH350 installed in the truck that's roached, and have been wanting an overdrive anyway. I'm not sure if there's any wiring included, but let's just assume there isn't. What exactly would it take to install this transmission? I would assume someone makes a conversion kit for these trannies, any links? Also, are the pressures on these controlled via a kickdown cable, like the 700R4?

Thanks for any info.

71chevylowrider · 03-16-2007, 06:48 PM

i thought 4L60 "E" trannies are electronically controlled, but I know there is some aftermarket companies that make a control box, like an ECU that is only for the tranny, so you can have a 4l60E on a carburated vehicle, I'll look around & see if I can find that info for ya.

powell72 · 03-16-2007, 06:53 PM

Are you refering to a 4L60E? A 4L60 is a 700R4. I think 4L60E's do require a stand alone computer.

71chevylowrider · 03-16-2007, 06:54 PM

internally I believe they are the same, but if it's a 4L60 you need this.

http://www.tciauto.com/Products/Electronics/

powell72 · 03-16-2007, 07:03 PM

Quote:

Originally Posted by 71chevylowrider

internally I believe they are the same, but if it's a 4L60 you need this.

http://www.tciauto.com/Products/Electronics/

He needs that if it's a 4L60E, I knew what you meant but I figure I'd clarify for his sake.

Blue85 · 03-16-2007, 07:06 PM

If its a 4l60E, you will need an aftermarket computer for it from TCI http://www.jegs.com/webapp/wcs/store...47891_-1_10733 If it is just a 4L60, you will only need Tourque Converter Clutch wiring, and depending on the tailshaft length of your tranny you may have to have your driveshaft shortened, i do know for a fact, that a 9 inch tailshaft th350, will swap to a 700r4 with no mods.

Blue85 · 03-16-2007, 07:07 PM

guess i type to slow lol

71chevylowrider · 03-16-2007, 07:08 PM

Yes sir thats what I mean if its a 4L60 it's a 700R4, if it's a 4L60E then he needs that really cool thingy bobby

71chevylowrider · 03-16-2007, 07:10 PM

Hey Blue, no mods at all? Not even having to move the transmission crossmember? If so that is very cool

Blue85 · 03-16-2007, 07:15 PM

ya gotta move the xmember 2 inches back, but that was it

**68 Stepside** · 03-16-2007, 07:20 PM

Holy cow, tons of info already. I meant 4L60E, my fault. Thanks for the info already posted!

03-16-2007, 06:42 PM	#1
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Question for the 4L60 guys?? Hey all, I've found a 4L60 locally for cheap. I've currently got a TH350 installed in the truck that's roached, and have been wanting an overdrive anyway. I'm not sure if there's any wiring included, but let's just assume there isn't. What exactly would it take to install this transmission? I would assume someone makes a conversion kit for these trannies, any links? Also, are the pressures on these controlled via a kickdown cable, like the 700R4? Thanks for any info. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay Last edited by 68 Stepside; 03-16-2007 at 06:42 PM. Reason: Forgot to subscribe.

03-16-2007, 06:48 PM	#2
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: Question for the 4L60 guys?? i thought 4L60 "E" trannies are electronically controlled, but I know there is some aftermarket companies that make a control box, like an ECU that is only for the tranny, so you can have a 4l60E on a carburated vehicle, I'll look around & see if I can find that info for ya. Last edited by 71chevylowrider; 03-16-2007 at 06:55 PM.

03-16-2007, 06:53 PM	#3
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Question for the 4L60 guys?? Are you refering to a 4L60E? A 4L60 is a 700R4. I think 4L60E's do require a stand alone computer. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html Last edited by powell72; 03-16-2007 at 06:53 PM.

03-16-2007, 06:54 PM	#4
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: Question for the 4L60 guys?? internally I believe they are the same, but if it's a 4L60 you need this. http://www.tciauto.com/Products/Electronics/

03-16-2007, 07:06 PM	#6
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Question for the 4L60 guys?? If its a 4l60E, you will need an aftermarket computer for it from TCI http://www.jegs.com/webapp/wcs/store...47891_-1_10733 If it is just a 4L60, you will only need Tourque Converter Clutch wiring, and depending on the tailshaft length of your tranny you may have to have your driveshaft shortened, i do know for a fact, that a 9 inch tailshaft th350, will swap to a 700r4 with no mods. __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

03-16-2007, 07:07 PM	#7
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Question for the 4L60 guys?? guess i type to slow lol __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

03-16-2007, 07:08 PM	#8
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: Question for the 4L60 guys?? Yes sir thats what I mean if its a 4L60 it's a 700R4, if it's a 4L60E then he needs that really cool thingy bobby

03-16-2007, 07:10 PM	#9
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: Question for the 4L60 guys?? Hey Blue, no mods at all? Not even having to move the transmission crossmember? If so that is very cool

03-16-2007, 07:15 PM	#10
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Question for the 4L60 guys?? ya gotta move the xmember 2 inches back, but that was it __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

03-16-2007, 07:20 PM	#11
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Re: Question for the 4L60 guys?? Holy cow, tons of info already. I meant 4L60E, my fault. Thanks for the info already posted! __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.