Power brake boster? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Fast68Chevy* · 03-23-2002, 09:01 PM

booster is good if it holds vacuum in it enough to push pedal 2 or 3 times before using up the reserve and making the pedal hard again, this is when engien is off after just being run and shut off

you should be able to use any power master cylinder on any booster, *should*
compare the mounting area of the two cylinders to make sure the cylinder protrudes/is sunk into the casting body of the cylinder the same as the other, manual brake cylinder wont work on a booster

03-23-2002, 09:01 PM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	booster is good if it holds vacuum in it enough to push pedal 2 or 3 times before using up the reserve and making the pedal hard again, this is when engien is off after just being run and shut off you should be able to use any power master cylinder on any booster, should compare the mounting area of the two cylinders to make sure the cylinder protrudes/is sunk into the casting body of the cylinder the same as the other, manual brake cylinder wont work on a booster



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.