Project Lemon Drop: anything but stock!

[72CSTC5]

Hey Rock, why are you letting the sealer dry and then wetsanding, you should have just went wet on wet with the sealer, color, and then clear. I just check my base before I clear to make sure none of the sealer had trash in it. If it does I just lightly "nib" that spot and blow more color and clear.

[Rokcrln]

Originally Posted by 72CSTC5

Hey Rock, why are you letting the sealer dry and then wetsanding, you should have just went wet on wet with the sealer, color, and then clear. I just check my base before I clear to make sure none of the sealer had trash in it. If it does I just lightly "nib" that spot and blow more color and clear.

This is just the way we went with it. 6 of 1... This just gives us a chance to check for any flaws before color goes on. We are spending almost 2k on base and clear so I did not want any problems in the end. Plus a nice glass finish before color should give for a nicer lay down I hope.

Kevin
LFD Inc.