WTB Nice Carb and Intake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rsorrowjr · 03-17-2007, 01:39 PM

Im looking for a nice 4bbl carb and intake for a 350. It has heads that are from an 88 model. I need a carb that is at least 600cfm either edlebrock or holley. Let me know what you have. Also looking for a set of long tube headers. Thanks

BarryB · 03-17-2007, 02:28 PM

I have a weiand stealth intake idle to 7000 rpm's. I'll take 100 + shipping . The only carbs I have are Holley double pumpers 650 cfm. I'll have to have 250 for one of those. If any interests let me know.

rsorrowjr · 03-18-2007, 12:36 PM

Thanks BarryB but thats a little more than my budget will allow. I appreciate your time though

rsorrowjr · 03-18-2007, 09:56 PM

ttt

rsorrowjr · 03-19-2007, 11:59 AM

ttt

DennyB · 03-19-2007, 08:21 PM

I have a Weiand single plane aluminum manifold, and a Carter AFB Competition series carb. part #9636 SA.
I think it came off a mopar. it dosent have the auto trans kickdown cable provision but the throttle will hookup.
I will take $150 plus shipping for the set.
I dont have a pic of the manifold on this pc but will post the carb.

rsorrowjr · 03-19-2007, 10:15 PM

Is the carb in good shape? Do you know the part number for the intake so I can make sure it would fit my motor?

DennyB · 03-20-2007, 07:46 AM

I just realized you have 88 heads. I don't know is this manifold will fit.
Its an old manifold. probably similar vintage as your truck. It needs a good cleaning and was painted black. The front freeze plug was replaced with a rubber one. The number on the manifold is WEIAND 7508.
If you just want the carb I'll take $100 for it.
I have not run the carb on the road. Just to test fire and tune my engine.
Seemed to run fine. I did not hook up the electric choke.
I'll see if I can load manifold pics from this pc.

DennyB · 03-21-2007, 03:37 PM

rsorrowjr

Did you want any of this?
Otherwise I will put them away.

Thanks

EyeH8the24 · 03-21-2007, 04:03 PM

barry b you still have the intake ? any pics ?

rsorrowjr · 03-21-2007, 04:18 PM

I dont think those are going to work for me. Sorry for the delayed response. Thanks

DennyB · 03-21-2007, 04:20 PM

No problem.

03-17-2007, 01:39 PM	#1
rsorrowjr Junior Member Join Date: Oct 2006 Location: georgia Posts: 73	WTB Carb,Intake, Headers Im looking for a nice 4bbl carb and intake for a 350. It has heads that are from an 88 model. I need a carb that is at least 600cfm either edlebrock or holley. Let me know what you have. Also looking for a set of long tube headers. Thanks __________________ 1971 GMC 4x4 SWB 1970 GMC LWB 2002 Mustang GT 2004 Honda VTX 1800c Last edited by rsorrowjr; 03-19-2007 at 11:59 AM.

03-17-2007, 02:28 PM	#2
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: WTB Nice Carb and Intake I have a weiand stealth intake idle to 7000 rpm's. I'll take 100 + shipping . The only carbs I have are Holley double pumpers 650 cfm. I'll have to have 250 for one of those. If any interests let me know.

03-18-2007, 12:36 PM	#3
rsorrowjr Junior Member Join Date: Oct 2006 Location: georgia Posts: 73	Re: WTB Nice Carb and Intake Thanks BarryB but thats a little more than my budget will allow. I appreciate your time though __________________ 1971 GMC 4x4 SWB 1970 GMC LWB 2002 Mustang GT 2004 Honda VTX 1800c

03-18-2007, 09:56 PM	#4
rsorrowjr Junior Member Join Date: Oct 2006 Location: georgia Posts: 73	Re: WTB Nice Carb and Intake ttt __________________ 1971 GMC 4x4 SWB 1970 GMC LWB 2002 Mustang GT 2004 Honda VTX 1800c

03-19-2007, 11:59 AM	#5
rsorrowjr Junior Member Join Date: Oct 2006 Location: georgia Posts: 73	Re: WTB Nice Carb and Intake ttt __________________ 1971 GMC 4x4 SWB 1970 GMC LWB 2002 Mustang GT 2004 Honda VTX 1800c

03-19-2007, 08:21 PM	#6
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: WTB Nice Carb and Intake I have a Weiand single plane aluminum manifold, and a Carter AFB Competition series carb. part #9636 SA. I think it came off a mopar. it dosent have the auto trans kickdown cable provision but the throttle will hookup. I will take $150 plus shipping for the set. I dont have a pic of the manifold on this pc but will post the carb. Attached Images __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-19-2007, 10:15 PM	#7
rsorrowjr Junior Member Join Date: Oct 2006 Location: georgia Posts: 73	Re: WTB Nice Carb and Intake Is the carb in good shape? Do you know the part number for the intake so I can make sure it would fit my motor? __________________ 1971 GMC 4x4 SWB 1970 GMC LWB 2002 Mustang GT 2004 Honda VTX 1800c

03-20-2007, 07:46 AM	#8
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: WTB Nice Carb and Intake I just realized you have 88 heads. I don't know is this manifold will fit. Its an old manifold. probably similar vintage as your truck. It needs a good cleaning and was painted black. The front freeze plug was replaced with a rubber one. The number on the manifold is WEIAND 7508. If you just want the carb I'll take $100 for it. I have not run the carb on the road. Just to test fire and tune my engine. Seemed to run fine. I did not hook up the electric choke. I'll see if I can load manifold pics from this pc. Attached Images __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-21-2007, 03:37 PM	#9
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: WTB Nice Carb and Intake rsorrowjr Did you want any of this? Otherwise I will put them away. Thanks __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-21-2007, 04:03 PM	#10
EyeH8the24 Registered User Join Date: Dec 2004 Location: beulah,alabama Posts: 1,075	Re: WTB Nice Carb and Intake barry b you still have the intake ? any pics ?

03-21-2007, 04:18 PM	#11
rsorrowjr Junior Member Join Date: Oct 2006 Location: georgia Posts: 73	Re: WTB Nice Carb and Intake I dont think those are going to work for me. Sorry for the delayed response. Thanks __________________ 1971 GMC 4x4 SWB 1970 GMC LWB 2002 Mustang GT 2004 Honda VTX 1800c

03-21-2007, 04:20 PM	#12
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: WTB Nice Carb and Intake No problem. __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.