GenIII w/ ECE mounts, what headers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 03-09-2007, 02:15 AM

Anyone figured out what fits? ECE says Sanderson is in the process of developing some...

I have a set of the 98-99 Camaro/Firebird manifolds that I know will work, but they flow like crap. Looking for a better alternative.

-Chris

shifty · 03-09-2007, 12:12 PM

I'm using the 98-99, great fit, I don't care if they flow like crap

I'm not building a racecar

piecesparts · 03-09-2007, 12:23 PM

Street and Performance has a set of headers for the Gen III and it fits a 67-72 truck.

shifty · 03-09-2007, 01:28 PM

But will they fit with the ECE mounts? The ECE mounts are pretty beefy.

gringoloco · 03-10-2007, 01:45 PM

Quote:

Originally Posted by shifty

But will they fit with the ECE mounts? The ECE mounts are pretty beefy.

There lies the problem... May just get it going with manifolds and get the Sandersons if they ever materialize.

Has anyone gotten the A/C compressor to fit with the adapter plate style mounts? I think that would open up the header options a bit.

-Chris

shifty · 03-10-2007, 06:56 PM

I could have left it in the stock position on mine, it would have cleared, but I opted to delete it for now.

piecesparts · 03-10-2007, 10:03 PM

Quote:

Originally Posted by shifty

But will they fit with the ECE mounts? The ECE mounts are pretty beefy.

S&P sells a beefy conversion plate that moves the mounts to a different position. Their headers clear that alright.

gringoloco · 03-10-2007, 11:18 PM

Quote:

Originally Posted by shifty

I could have left it in the stock position on mine, it would have cleared, but I opted to delete it for now.

You're using ECE mounts, correct? I know it will fit no problem with them, but the S&P mounts move the engine back 3-4". This will cause fitment problems with the stock compressor mounting.

S&P also has an A/C relocation bracket, but it is $$$, and ugly.

shifty · 03-10-2007, 11:26 PM

I went with ECE and yes, it would have fit. All you gotta do is say "S&P" and it's gonna cost more money

I'm surprised they don't charge you just to print their company name at the forum

tphsmith · 03-11-2007, 08:32 AM

I was wondering if anyone else veiwed s/p little pricey. the catalog has so much eye candy, its hard for me to look in it because my eyes just cant focus that well any more

68 short step · 03-11-2007, 09:07 AM

i have 00 camaro/firebird headers...

link to what i had to do
http://67-72chevytrucks.com/vboard/s...69#post1683069

68 short step · 03-11-2007, 09:08 AM

with pipes

**Hart_Rod** · 03-11-2007, 09:34 AM

Quote:

Originally Posted by 68 short step

i have 00 camaro/firebird headers...
[

link to what i had to do
http://67-72chevytrucks.com/vboard/s...69#post1683069

That looks really good! Do you have the part number?

68 short step · 03-11-2007, 10:02 AM

Quote:

Originally Posted by Hart_Rod

That looks really good! Do you have the part number?

http://www.texas-speed.com/shop/item...d=184&catid=45
looks to be on sale this weekend "blowout price" 379.99

piecesparts · 03-11-2007, 11:07 AM

S&P can be pricey, but the others aren't giving it to you either. You will pay for the fit sooner or later.

gringoloco · 03-11-2007, 07:18 PM

Quote:

Originally Posted by 68 short step

i have 00 camaro/firebird headers...

link to what i had to do
http://67-72chevytrucks.com/vboard/s...69#post1683069

Looks good, but aren't you using 'plate style' adapters? Are you running A/C?

<---Wants to have cake and eat it too...

billyjo · 03-11-2007, 08:07 PM

I'm using the S&P mounts and the compressor fits, I had to trim the bracket a bit to miss the mounting plate. I also haven't come to the part where the compressor gets hooked up but I've been keeping my eye on some fittings that look like they will work.

gringoloco · 03-19-2007, 09:49 PM

Quote:

Originally Posted by billyjo

I've been keeping my eye on some fittings that look like they will work.

Care to share? I'd like to find something that will work. -Chris

Fastrucken · 03-21-2007, 09:50 PM

Check this out for a/c connection.... http://www.docsblocks.com/compressor_blocks.asp

Im planning my genIII engine swap in my 65 c10 and just ran across these...

Graham

03-09-2007, 02:15 AM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	GenIII w/ ECE mounts, what headers? Anyone figured out what fits? ECE says Sanderson is in the process of developing some... I have a set of the 98-99 Camaro/Firebird manifolds that I know will work, but they flow like crap. Looking for a better alternative. -Chris __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

03-09-2007, 12:12 PM	#2
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: GenIII w/ ECE mounts, what headers? I'm using the 98-99, great fit, I don't care if they flow like crap I'm not building a racecar __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-09-2007, 12:23 PM	#3
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: GenIII w/ ECE mounts, what headers? Street and Performance has a set of headers for the Gen III and it fits a 67-72 truck.

03-09-2007, 01:28 PM	#4
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: GenIII w/ ECE mounts, what headers? But will they fit with the ECE mounts? The ECE mounts are pretty beefy. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-10-2007, 06:56 PM	#6
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: GenIII w/ ECE mounts, what headers? I could have left it in the stock position on mine, it would have cleared, but I opted to delete it for now. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-10-2007, 11:26 PM	#9
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: GenIII w/ ECE mounts, what headers? I went with ECE and yes, it would have fit. All you gotta do is say "S&P" and it's gonna cost more money I'm surprised they don't charge you just to print their company name at the forum __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-11-2007, 08:32 AM	#10
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: GenIII w/ ECE mounts, what headers? I was wondering if anyone else veiwed s/p little pricey. the catalog has so much eye candy, its hard for me to look in it because my eyes just cant focus that well any more __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

03-11-2007, 09:07 AM	#11
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: GenIII w/ ECE mounts, what headers? i have 00 camaro/firebird headers... link to what i had to do http://67-72chevytrucks.com/vboard/s...69#post1683069

03-11-2007, 09:08 AM	#12
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: GenIII w/ ECE mounts, what headers? with pipes

03-11-2007, 11:07 AM	#15
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: GenIII w/ ECE mounts, what headers? S&P can be pricey, but the others aren't giving it to you either. You will pay for the fit sooner or later.

03-11-2007, 08:07 PM	#17
billyjo Junior Member Join Date: Oct 2005 Location: Vancouver, WA Posts: 95	Re: GenIII w/ ECE mounts, what headers? I'm using the S&P mounts and the compressor fits, I had to trim the bracket a bit to miss the mounting plate. I also haven't come to the part where the compressor gets hooked up but I've been keeping my eye on some fittings that look like they will work. __________________ 1972 K/5 4x4, Radixed LS1 6.0, 428HP/445TQ, Lingenfelter GT2-3 cam, WCCH 90mm J-Tube, LS2 90mm TB, Stainless Works Headers, NV4500, 4.56 gears, Detroit Lockers, 14 bolt FF, Dana 60, 4 wheel disk Hydro Brakes, dual electric fans, Autometer guages, 4" lift, Zero Rates, Weld Evo Velocity XT8 wheels, 35x12.5x17 Super Swamper SSR's..... http://s72.photobucket.com/albums/i1...tos/?start=all

03-21-2007, 09:50 PM	#19
Fastrucken Junior Member Join Date: May 2006 Location: Peninsula, Oh Posts: 197	Re: GenIII w/ ECE mounts, what headers? Check this out for a/c connection.... http://www.docsblocks.com/compressor_blocks.asp Im planning my genIII engine swap in my 65 c10 and just ran across these... Graham __________________ A good friend will come bail you out of jail, but a true friend will be sitting next to you saying, "That was ****ing awesome."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.