1978 Scottsdale Stepside..New Here. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

liljon285 · 03-22-2007, 02:27 PM

Yea but it has a bunch of other parts like.......

That is pretty much the kit itself.

Malo83 · 03-22-2007, 02:55 PM

The 2 bottom "U" saddles mount under the axle and into the bottom of the spring perches, make sure you put them in with the 2 small holes Forward as this will pull the drive shaft out enough from the tranny to prevent binding, the 2 top brackets are your shock extenders, which you would bolt on to the shock mounts on the axle, mount the 2 red bump stops on the frame directly above the axle to prevent your axle from bottoming out on the frame. Pretty easy. search the site for pics as i've seen a few with pics of the setup

John

03-22-2007, 02:27 PM	#1
liljon285 That Guy Join Date: Sep 2005 Location: miami, fl Posts: 327	Re: 1978 Scottsdale Stepside..New Here. Yea but it has a bunch of other parts like....... That is pretty much the kit itself. __________________ 1978 Chevy Scottdale Stepside, 3rd engine- 350c.i. built with cam and lifters, holley 670cfm carb. and intake,heads shaved .60. Truck is a project, and I am its restorererer!

03-22-2007, 02:55 PM	#2
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: 1978 Scottsdale Stepside..New Here. The 2 bottom "U" saddles mount under the axle and into the bottom of the spring perches, make sure you put them in with the 2 small holes Forward as this will pull the drive shaft out enough from the tranny to prevent binding, the 2 top brackets are your shock extenders, which you would bolt on to the shock mounts on the axle, mount the 2 red bump stops on the frame directly above the axle to prevent your axle from bottoming out on the frame. Pretty easy. search the site for pics as i've seen a few with pics of the setup John



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.