|
04-02-2007, 08:54 PM
|
#1 |
|
Registered User
Join Date: Mar 2006
Location: Texas
Posts: 5
|
Need Help Badly
I have a 70 c-10 that the PO changed to disc brakes. The problem is the only numbers I can find are in the hub assembly they turned into a rotor,it is a gm number but I cant seem to be able to find it anywhere the number is 383310 with either 80 or SD at the end I need to replace the wheel bearing and cant.
|
|
|
|
04-02-2007, 09:00 PM
|
#2 |
|
Dave's not here, man
Join Date: Jun 2004
Location: Winder, Georgia
Posts: 2,000
|
Re: Need Help Badly
Have you checked the wheel bearing itself for a part number, or is that number you listed from the wheel bearing?
__________________
- 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 |
|
|
|
|
04-02-2007, 09:18 PM
|
#3 |
|
Registered User
Join Date: Mar 2006
Location: Texas
Posts: 5
|
Re: Need Help Badly
Ya I checked it but there gone on the bearing,that number is from the hub
|
|
|
|
|
04-02-2007, 10:41 PM
|
#4 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Need Help Badly
find a good parts guy, and ask for the P/N for a 71 inner and outer, then an 80 inner and outer, and then an 86 inner and outter.
if my suspicions are right... it's the same. |
|
|
|
|
04-02-2007, 10:52 PM
|
#5 |
|
Registered User
 
Join Date: Nov 2006
Location: Arkansas
Posts: 232
|
Re: Need Help Badly
Or take your bearings to a parts house and find a patient counterperson to match them. I work at a Carquest and thats a normal routine. At the store I work at, there's only about 30 or so sets of bearings and races that are your typical wheel bearings, so it doesn't take that long if you don't have a number to go by.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
