67 GMC small back window F/S (Colorado) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glock35ipsc · 04-05-2007, 01:43 PM

TRUCK HAS BEEN SOLD!!

OK, last attempt to find her a new home, then she is going to scrap! I can get about as much for scrap as I want for it.

SORRY, I'M NOT PARTING IT OUT!! I just simply don't have time for that at the moment, unless Congress can bump us up to 32 hour days!

67 GMC long bed 1/2 ton, small back window, leaf spring rear. 305 V-6, it originally had a TH-400 behind it (no trans right now). I have started the motor to hear it run, it fires right up and sounds good, other than a couple exhaust leaks.

The body is actually pretty decend. Solid metal. Cab corners and rockers are in real good shape. The driver rocker has a dent that can be pulled, but there is little to no rust! Inside floor has some rust at the rocker and kick panels, the usual stuff. Bed has large dents on both sides, can't remember the condition of the steel floor.

The rear end is kinda hosed, it has axles stuck in there to move it around. It will come with a 6-lug 12-bolt 3.73 rear that came out of my 68. It has new brake shoes, new brake hardware kit, new drums and new wheel cylinders. About 200 miles on the brake stuff.

It is missing some brake lines, and I will throw in all the brake lines from my 68 that will have everything needed. Will throw in the driveshaft as well. Has the seat, not the best sahpe but the frame is good. Needs a pass side front fender. Have a better grill and rad support for it.

Last pic - I have a new patch panel that replaces the entire lower front section of the bed (right side) from just above the body line down, wheel well to the front.

Ugly, but worthy! $400 OBO, you pick up. I will deliver locally (50 mile radius) for free. PM me or post here if interested.

Thanks!

glock35ipsc · 04-05-2007, 01:51 PM

More......

qksilver · 04-05-2007, 02:06 PM

What color is that? The coral?

glock35ipsc · 04-05-2007, 02:14 PM

I don't remember if the SPID is still there or not, but I'll look. It has definately faded, thats fur shur! It sure doesn't match anything on the 1967 PPG factory color chart, other than maybe the Palomeno Tan after fading.....

6772KEVIN · 04-05-2007, 03:54 PM

Does it have a clear title?

Dano69c10 · 04-05-2007, 05:49 PM

a shame to see that get scrapped. I hope someone close by can buy that truck.

glock35ipsc · 04-05-2007, 05:56 PM

Quote:

Originally Posted by 6772KEVIN

Does it have a clear title?

It does, I have the title in my name.

6772KEVIN · 04-05-2007, 06:12 PM

Is there any rust over the windshield and on the firewall?

glock35ipsc · 04-05-2007, 06:23 PM

Not that I remember, but I will look again tonight. Over the windshield meaning above the windshield?

BarryB · 04-05-2007, 07:42 PM

Somebody needs to save this fine very restorable truck. If anything put a trans in and use it for a farm truck. wish it were closer I would have done had it by now.

glock35ipsc · 04-05-2007, 08:52 PM

No rust that I can see around the windshield. Surface stuff, but no holes or anywhere it had ate through.

BarryB - My intention was to put in a tranny (sold it) and the rearend and just use it as dump runner. Later I thought about ditching the bed, putting on a flat bed, fixing and painting the cab and using it as a shop truck. But I just don't have the time to do that now, and I REAAAAAAALY need the space!

**special-K** · 04-06-2007, 09:30 AM

Actually that PPG chart is way off with the Palamino Tan and your truck is closer than the chip.I`d have that truck for my`67 project if at all possible.Just not feasable from so far.The front clip I stared with is Palamino Tan with a beautiful chrome grille and Custom badges.Man,that cab`n`doors would be so right on there.Good luck.I wish another local member could handle this.

70gmcjimmy · 04-09-2007, 08:07 PM

Damm Glock, Wish I could do er. Just have to TTT this again. Cant bear to know if she goes to the scrapper tho.

Somebody save this truck!!!!

Later---DAC

Bamm · 04-09-2007, 08:49 PM

Man, I would kill for that cab on this side of the states....

JTK20 · 04-09-2007, 10:09 PM

I'll get some shipping prices. That's my favorite front end on these trucks (my first ever vehicle was a 68 C-10 I bought for $500 when I was 16, been looking for another like it since I got rid of it not long after I got it). That cab looks really solid. Here in Wisconsin, a guy would get shot if he took a truck with that little rust to the scrapyard.

Oh and by the way, you also have a PM.

glock35ipsc · 04-09-2007, 10:27 PM

Sale pending.............

motos · 04-10-2007, 05:35 AM

hey Glock, give us a pic of the tailgate

JTK20 · 04-10-2007, 07:05 PM

He PM'd me and said it was sold.

I think that's the 4th time in 10 or so days that I've been just barely late.

70gmcjimmy · 04-11-2007, 10:51 PM

I sure hope he dont mean "sale pending" -----at the scrapyard! Price of scrap metal these days, there is a lot of good stuff bitin the dust.

Later---DAC

bighead · 04-11-2007, 10:53 PM

Sorry fellers, this is going to be my new project.

04-05-2007, 01:43 PM	#1
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	67 GMC small back window F/S (Colorado) TRUCK HAS BEEN SOLD!! OK, last attempt to find her a new home, then she is going to scrap! I can get about as much for scrap as I want for it. SORRY, I'M NOT PARTING IT OUT!! I just simply don't have time for that at the moment, unless Congress can bump us up to 32 hour days! 67 GMC long bed 1/2 ton, small back window, leaf spring rear. 305 V-6, it originally had a TH-400 behind it (no trans right now). I have started the motor to hear it run, it fires right up and sounds good, other than a couple exhaust leaks. The body is actually pretty decend. Solid metal. Cab corners and rockers are in real good shape. The driver rocker has a dent that can be pulled, but there is little to no rust! Inside floor has some rust at the rocker and kick panels, the usual stuff. Bed has large dents on both sides, can't remember the condition of the steel floor. The rear end is kinda hosed, it has axles stuck in there to move it around. It will come with a 6-lug 12-bolt 3.73 rear that came out of my 68. It has new brake shoes, new brake hardware kit, new drums and new wheel cylinders. About 200 miles on the brake stuff. It is missing some brake lines, and I will throw in all the brake lines from my 68 that will have everything needed. Will throw in the driveshaft as well. Has the seat, not the best sahpe but the frame is good. Needs a pass side front fender. Have a better grill and rad support for it. Last pic - I have a new patch panel that replaces the entire lower front section of the bed (right side) from just above the body line down, wheel well to the front. Ugly, but worthy! $400 OBO, you pick up. I will deliver locally (50 mile radius) for free. PM me or post here if interested. Thanks! Attached Images __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 04-10-2007 at 09:33 AM.

04-05-2007, 01:51 PM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: 67 GMC small back window F/S (Colorado) More...... Attached Images __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

04-05-2007, 02:06 PM	#3
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 67 GMC small back window F/S (Colorado) What color is that? The coral?

04-05-2007, 02:14 PM	#4
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: 67 GMC small back window F/S (Colorado) I don't remember if the SPID is still there or not, but I'll look. It has definately faded, thats fur shur! It sure doesn't match anything on the 1967 PPG factory color chart, other than maybe the Palomeno Tan after fading..... __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 04-05-2007 at 02:17 PM.

04-05-2007, 03:54 PM	#5
6772KEVIN Junior Member Join Date: Aug 2003 Location: MISSOURI Posts: 72	Re: 67 GMC small back window F/S (Colorado) Does it have a clear title?

04-05-2007, 05:49 PM	#6
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: 67 GMC small back window F/S (Colorado) a shame to see that get scrapped. I hope someone close by can buy that truck. __________________ '69 Fleet It ain't yours, if you didn't build it!

04-05-2007, 06:12 PM	#8
6772KEVIN Junior Member Join Date: Aug 2003 Location: MISSOURI Posts: 72	Re: 67 GMC small back window F/S (Colorado) Is there any rust over the windshield and on the firewall?

04-05-2007, 06:23 PM	#9
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: 67 GMC small back window F/S (Colorado) Not that I remember, but I will look again tonight. Over the windshield meaning above the windshield? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

04-05-2007, 07:42 PM	#10
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: 67 GMC small back window F/S (Colorado) Somebody needs to save this fine very restorable truck. If anything put a trans in and use it for a farm truck. wish it were closer I would have done had it by now.

04-05-2007, 08:52 PM	#11
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: 67 GMC small back window F/S (Colorado) No rust that I can see around the windshield. Surface stuff, but no holes or anywhere it had ate through. BarryB - My intention was to put in a tranny (sold it) and the rearend and just use it as dump runner. Later I thought about ditching the bed, putting on a flat bed, fixing and painting the cab and using it as a shop truck. But I just don't have the time to do that now, and I REAAAAAAALY need the space! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

04-06-2007, 09:30 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67 GMC small back window F/S (Colorado) Actually that PPG chart is way off with the Palamino Tan and your truck is closer than the chip.I`d have that truck for my`67 project if at all possible.Just not feasable from so far.The front clip I stared with is Palamino Tan with a beautiful chrome grille and Custom badges.Man,that cab`n`doors would be so right on there.Good luck.I wish another local member could handle this. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-09-2007, 08:07 PM	#13
70gmcjimmy GMCDAC Join Date: Apr 2006 Location: Rapid City, SD Posts: 837	Re: 67 GMC small back window F/S (Colorado) Damm Glock, Wish I could do er. Just have to TTT this again. Cant bear to know if she goes to the scrapper tho. Somebody save this truck!!!! Later---DAC __________________ 1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild! 1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish! 1955 GMC 100 2nd design driven almost daily! Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09 GMC driver for 30 years!

04-09-2007, 08:49 PM	#14
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: 67 GMC small back window F/S (Colorado) Man, I would kill for that cab on this side of the states.... __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

04-09-2007, 10:09 PM	#15
JTK20 Active Member Join Date: Oct 2006 Location: In the north and VERY proud of it. Posts: 150	Re: 67 GMC small back window F/S (Colorado) I'll get some shipping prices. That's my favorite front end on these trucks (my first ever vehicle was a 68 C-10 I bought for $500 when I was 16, been looking for another like it since I got rid of it not long after I got it). That cab looks really solid. Here in Wisconsin, a guy would get shot if he took a truck with that little rust to the scrapyard. Oh and by the way, you also have a PM. Last edited by JTK20; 04-09-2007 at 10:16 PM.

04-09-2007, 10:27 PM	#16
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: 67 GMC small back window F/S (Colorado) Sale pending............. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE



Register or Log In To remove these advertisements.

04-10-2007, 05:35 AM	#17
motos Registered User Join Date: Apr 2007 Location: Billings, MT Posts: 14	Re: 67 GMC small back window F/S (Colorado) hey Glock, give us a pic of the tailgate

04-10-2007, 07:05 PM	#18
JTK20 Active Member Join Date: Oct 2006 Location: In the north and VERY proud of it. Posts: 150	Re: 67 GMC small back window F/S (Colorado) He PM'd me and said it was sold. I think that's the 4th time in 10 or so days that I've been just barely late. Last edited by JTK20; 04-10-2007 at 07:06 PM.

04-11-2007, 10:51 PM	#19
70gmcjimmy GMCDAC Join Date: Apr 2006 Location: Rapid City, SD Posts: 837	Re: 67 GMC small back window F/S (Colorado) I sure hope he dont mean "sale pending" -----at the scrapyard! Price of scrap metal these days, there is a lot of good stuff bitin the dust. Later---DAC __________________ 1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild! 1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish! 1955 GMC 100 2nd design driven almost daily! Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09 GMC driver for 30 years!

04-11-2007, 10:53 PM	#20
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: 67 GMC small back window F/S (Colorado) Sorry fellers, this is going to be my new project.

Register or Log In To remove these advertisements.