bag

[70stroker]

I have a 70 gmc lwb i am thinking abut bagging. Right now it has a 6 7 drop. I would like to to ride atleast that low. ill show a pic at the end. But would like it to go down a little when parked. I DONT want it to lay rocker or frame. I dont care if the crossmember hits the ground when bags are layed out. I do have a few thing i would like to have.

A kit, front and rear or seperate. i dont want to piece parts togther
I would like it to be bolt in mainly, little welding and no serious modding of frame.
a good reliable kit.

thanks guys and pics would be awesome.





Also i have leaves in the rear now. was thinking about gettin a crossmember that the arms connect to and new trailing arms if i could just put the bags on those,

[UP GRADE]

a lot guys have bought there kits form www.*****************.

[Chops_by_Chase]

I would look into converting from leaf springs, to trailing arms. there are plenty of aftermarket kits that do this as a bolt in, or you if could find an old chevy that has trailing arms and just take out the trailing arms and crossmembers and use them on yours, then it is an easy bag install. most of this could be a bolt-in

[67Fleet]

If you're willing to go through all the trouble to switch to trailing arms, I would recommend just 4-linking it instead. You'll be happier in the end.

In terms of a "kit", I'd go to ***************** and they have a "build your own kit". That's what I did. They ship quickly, have good product and great customer service, and all for the right price.

[bagged69c10]

Just buy this.http://ridetech.com/productinfo/prod...R21800-LCA.jpg

[BACKYARD88]

As far as simplicity goes thats about as easy and as close to "bolt on" as you can get. Add the suicide doors front kit and that's the bulk of what you will need.

[jimmydean]

Originally Posted by bagged69c10

Just buy this.http://ridetech.com/productinfo/prod...R21800-LCA.jpg

What kit is that? I can't find it on the site.

[bagged69c10]

Do a search by vehicle and its under rear kits. Heres the link to the page.http://ridetech.com/wizard/results.asp

[bagged69c10]

There is also a similar kit with CPP for a bit cheaper.
http://www.classicperform.com/NewPro...ionPackage.htm

[70stroker]

does anyone have any pictures of thee trucks bagged. maybe some of ride height and as low as they go? So is that 1700 dollars for the complete rear kit with bags, right? then ill need the front what about compessors and tanks?
thanks

[jimmydean]

Originally Posted by 70stroker

does anyone have any pictures of thee trucks bagged. maybe some of ride height and as low as they go? So is that 1700 dollars for the complete rear kit with bags, right? then ill need the front what about compessors and tanks?
thanks

Do a search. 90% of the trucks in this forum is sitting on bags. As far as high/low/ride height. There are a TON of factors involved in "how low" they can go.

You can go all the way to the ground if you want. How much ground do you want? Frame? Pinch welds? Doors? I'm sure if you wanted, you could shorten the doors and get it even lower if you have the $$$.