|
04-12-2007, 12:55 AM
|
#1 |
|
Ever heard of Beech Island??
Join Date: Apr 2007
Location: Clemson, SC
Posts: 327
|
Newb 67 stepside
Hey from Clemson, South Carolina. This is my truck. 67 c10 2wd short bed stepside with the small window. It has been my daily drive for 4 years, since I was 17, it was my second vehicle, bought it off a friends uncle for $600 with a 250 inline 6 and a 3 speed manual tranny. Since then I have done;
-Sbc 305, bought for $40, then got it bored .030, put in a mild cam, rebuilt motor myself, and long tube headers. Last week I put on a holley street dominator intake, and finally a better working holley 600 carb. In the mail is a new distributor 65k volt super coil, mine is worn out. -Tires- 31/12.50/15 on the back 235/75/15 on the front -Cut a coil out of the front springs, wanna do a 2 inch drop on the back. -New windshield, tinted side windows and rear window -Chrome front bumper -1 1/2 in front swaybar from a dually -clear parking lights -bucket seats Here are a few pics, still gotta get some with bucket seats and new intake, very soon. |
|
|
|
04-12-2007, 01:00 AM
|
#2 |
|
Ever heard of Beech Island??
Join Date: Apr 2007
Location: Clemson, SC
Posts: 327
|
Re: Newb 67 stepside
A few more
|
|
|
|
|
04-12-2007, 01:00 AM
|
#3 |
|
I survived Dead Man's Curve.
Join Date: Apr 2006
Location: The Nine-Five-687
Posts: 389
|
Re: Newb 67 stepside
That bed isn't 67, did you change it?
Welcome to the forum from Sunny California! I have a blue 67 stepside also.
__________________
"The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive Cherry Bomb... Disturbing the Peace Since 1968. 
|
|
|
|
|
04-12-2007, 01:02 AM
|
#4 |
|
Registered User
Join Date: Dec 2004
Location: NW, WA.
Posts: 1,421
|
Re: Newb 67 stepside
 Nice to have another small window fan aboard here. I hope my 67 short step will come out looking good too.
|
|
|
|
|
04-12-2007, 01:02 AM
|
#5 |
|
Ever heard of Beech Island??
Join Date: Apr 2007
Location: Clemson, SC
Posts: 327
|
Re: Newb 67 stepside
No, its just the passenger fender its off a junkyard truck, still have to shave the reflector.
|
|
|
|
|
04-12-2007, 01:03 AM
|
#6 |
|
I survived Dead Man's Curve.
Join Date: Apr 2006
Location: The Nine-Five-687
Posts: 389
|
Re: Newb 67 stepside
AND you've got my Husky socket set!
__________________
"The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive Cherry Bomb... Disturbing the Peace Since 1968.
|
|
|
|
|
04-12-2007, 01:06 AM
|
#7 |
|
Ever heard of Beech Island??
Join Date: Apr 2007
Location: Clemson, SC
Posts: 327
|
Re: Newb 67 stepside
Heres the old one.
|
|
|
|
|
04-12-2007, 01:08 AM
|
#8 |
|
I survived Dead Man's Curve.
Join Date: Apr 2006
Location: The Nine-Five-687
Posts: 389
|
Re: Newb 67 stepside
Very nice looking truck, not too much different from mine! Nice color for the door panels too!
__________________
"The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive Cherry Bomb... Disturbing the Peace Since 1968.
|
|
|
|
|
04-12-2007, 01:20 AM
|
#9 |
|
Ever heard of Beech Island??
Join Date: Apr 2007
Location: Clemson, SC
Posts: 327
|
Re: Newb 67 stepside
Thanks, I like it alot better.
Heres a few engine pics. Have a New distributor in the mail, cant wait. Mine is about shot. And need to get some with the new intake on. And got my neighbor to spray paint his roof. |
|
|
|
|
04-12-2007, 01:30 AM
|
#10 |
|
The Original HotRod KnifeMaker
 
Join Date: Jan 2007
Location: Tenino, Washington
Posts: 811
|
Re: Newb 67 stepside
Nice truck!
Welcome to the boards-
__________________
Dave 69 GMC SWB 2WD 454 Turbo 400 |
|
|
|
|
04-12-2007, 01:43 AM
|
#11 |
|
Senior Member
Join Date: Mar 2007
Location: VANCOUVER ISLAND, B.C., Canada
Posts: 1,602
|
Re: Newb 67 stepside
Welcome to the board from Vancouver Island B.C.
esll.
__________________
Tomorrow is for doing today's stuff.  ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member) |
|
|
|
|
04-12-2007, 02:30 AM
|
#12 | |
|
Speed Limit = Floorboard
Join Date: Jan 2004
Location: Kasilof, Alaska
Posts: 803
|
Re: Newb 67 stepside
Welcome from Alaska.
Quote:
 LOL I just took mine outta the case and put it in my box haha. Those short wrenches are great.
__________________
1971 C20 350, 4-speed - Sold. 1985 K10 350, Built 700r4, Edel 1406, Performer intake, MSD Ign, Hooker Comps, Silverstars, Piaa drivers, LED tails, Toyo A/T 31's, Eaton Posi, the project. "Build for torque, horsepower will follow" Last edited by 71Chevy4-speed; 04-12-2007 at 02:30 AM. |
|
|
|
|
|
04-12-2007, 10:49 AM
|
#13 |
|
Ever heard of Beech Island??
Join Date: Apr 2007
Location: Clemson, SC
Posts: 327
|
Re: Newb 67 stepside
Its a good set of tools, just cant seem to find the deep 9/16".
|
|
|
|
|
04-12-2007, 10:30 PM
|
#14 |
|
Ever heard of Beech Island??
Join Date: Apr 2007
Location: Clemson, SC
Posts: 327
|
Re: Newb 67 stepside
Here are a few pics of what I got done last weekend. New(to me) bucket seats from Chevy lumina minivan. I sat in a lot of seats at the junkyard and these fit my truck pretty well, just had to drill a few holes. Sit at the same height of the bench seat but more comfortable and shifter fits better. I covered the seats myself still have to do the headrests and armrests better, but I am happy with it for the time being.
Got the intake on. Holley street dominator intake. This weekend putting on a new 65kV distributor. |
|
|
|
|
04-12-2007, 10:35 PM
|
#15 |
|
Registered User
Join Date: Feb 2007
Location: yuma arizona
Posts: 448
|
Re: Newb 67 stepside
what are those seats from?>
|
|
|
|
|
04-12-2007, 10:35 PM
|
#16 |
|
Registered User
Join Date: Feb 2007
Location: yuma arizona
Posts: 448
|
Re: Newb 67 stepside
nevermind i can read
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
