|
04-20-2007, 09:26 AM
|
#1 |
|
Registered User
Join Date: Mar 2005
Location: Just outside Durham, NC
Posts: 894
|
250 Flywheel install
I have a rebuilt/HP modified 250 sitting in my garage right now, I bought it setup for an automatic (flex plate installed already). My question is this, what do I need to do to my flywheel to install it on this other 250. I know when you pull a flywheel from and engine you mark it to ensure it goes back on in the proper orientation (but obviously this can't be done in this case).
Also, can anyone tell me the difference between internally and externally balanced flywheels?
__________________
1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's  1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM! |
|
|
|
04-20-2007, 12:56 PM
|
#2 |
|
Its a Truck Thing......
Join Date: Dec 2004
Location: Sierra Vista, Arizona
Posts: 3,179
|
Re: 250 Flywheel install
Probably just need to put in the bushing for the trans input shaft in the crank and I would get new flywheel bolts. I pulled the flywheel from my 250 and had it turned and installed it on my 283 and have had no issues, its been on there over 10 years....Go to a good machine shop and ask them about the balance, they should give you the answer.
Smitty
__________________
71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van" |
|
|
|
|
04-21-2007, 04:59 PM
|
#3 |
|
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,672
|
Re: 250 Flywheel install
I have never heard of having to mark it for proper orientation. Could you tell me more about this???
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
