|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-21-2007, 04:41 PM
|
#1 |
|
Registered User
Join Date: Apr 2007
Location: canton ga
Posts: 49
|
lowering 1968 truck and adding disc brakes
what is the cheapest way to lower my 68 chevy truck while also adding 5 lug disc brakes? i have power drum right now so will i need to change the booster also.
|
|
|
|
04-21-2007, 09:23 PM
|
#2 |
|
Registered User
Join Date: Apr 2007
Location: canton ga
Posts: 49
|
Re: lowering 1968 truck and adding disc brakes
anyone? if i do the 73-87 crossmember swap is the wheel mounting surface to wheel mounting surface measurments the same frome side to side on the 67-72 stuff as the 73-87 stuff? and when you do this swap and go to get the alignment done what year model truck do you tell them to use the specs for? 67-72 or 73-87 specs?
|
|
|
|
|
04-21-2007, 10:31 PM
|
#3 |
|
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: lowering 1968 truck and adding disc brakes
booster still works but you need to ditch the distrobution block for a propotioning valve. MC might need changed...
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
|
|
|
|
04-21-2007, 10:34 PM
|
#4 |
|
Registered User
 
Join Date: Aug 2005
Location: Philly
Posts: 1,140
|
Re: lowering 1968 truck and adding disc brakes
The width should be the same or the difference so minimal that you won't notice it.
|
|
|
|
|
04-21-2007, 10:35 PM
|
#5 | |
|
Registered User
Join Date: Aug 2005
Location: Philly
Posts: 1,140
|
Re: lowering 1968 truck and adding disc brakes
Quote:
|
|
|
|
|
|
04-22-2007, 12:06 AM
|
#6 |
|
Parts and more parts
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
|
Re: lowering 1968 truck and adding disc brakes
I have a 68 in my garage that has hada front crossmember from an 87 Chevy bolted under it and it appears to be very much the same as the original dimensions. I am changing my front to Classic Performance Products tubular A arms and using 3" drop spindles for my lowering.
|
|
|
|
|
04-22-2007, 12:35 AM
|
#7 |
|
Junior Member
Join Date: Jun 2006
Location: pomona ca
Posts: 187
|
Re: lowering 1968 truck and adding disc brakes
just be aware that if you end up going with disc brake drop conversion spindles your front wheels wheel have a wider track of about inch and a half on both sides.
__________________
67 short bed fleetside/1997 c1500 exteded cab/ 2004 accord/87 c10silverado 350 od tbi |
|
|
|
|
04-22-2007, 01:56 PM
|
#8 |
|
Registered User
Join Date: Apr 2007
Location: canton ga
Posts: 49
|
Re: lowering 1968 truck and adding disc brakes
so if you do the 73-87 swap and go to get a alignment what year model specs dop you tell them to use? 67-72 or 73-87?
|
|
|
|
|
04-22-2007, 05:07 PM
|
#9 |
|
Parts and more parts
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
|
Re: lowering 1968 truck and adding disc brakes
What ever year that you chose to use.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
