Parts for sale with possibly free delivery - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HuggerCST · 04-07-2007, 10:51 AM

There is a member in Sevierville, but I can't think of his board name.

see ten · 04-07-2007, 11:05 AM

Quote:

Originally Posted by HuggerCST

There is a member in Sevierville, but I can't think of his board name.

I think his ID is 68stepbed or somethin like that. He has the black swb stepper with the hopsters that he is rebuilding.

*72CSTC5* · 04-07-2007, 12:16 PM

If everyone passes on the floor let me know I will take it. If the beside sale does not go through either let me know I am a buyer.

DMARCUM123 · 04-08-2007, 12:51 AM

if i cant find some one hugger i will be there in pigeon forge on the 20

Down south truckin · 04-08-2007, 05:39 PM

I don't know if this will help but I will store it,but I'm about 190 miles south of Pigeon Forge and about 25-35 miles out of huggers path.I in lilburn ga if you want to do some mapquesting to see if it will work.let me know if I can help you. Mike

AuggieStyle · 04-09-2007, 11:12 PM

hugger I am in dallas and will be at pate at the end of the month, I hope to run into you maybe you will still have all the a/c parts i am interested.
I just have a long shopping list; looking for a grille, front and rear bumpers, rally wheels deep rear small fronts. and of course the a/c
drop me a line before pate let me know where you will be.
thanx
aug

DMARCUM123 · 04-13-2007, 12:21 AM

hugger let me know where send you the money for the floor

Random Guy · 04-20-2007, 02:54 PM

I am interested in the A/C stuff. Are you including the control head and pulley with it?

HuggerCST · 04-20-2007, 04:06 PM

Quote:

Originally Posted by Random Guy

I am interested in the A/C stuff. Are you including the control head and pulley with it?

The controls go with it, the compressor goes with it,(not locked up), even the uncut wiring harness goes with it, but the other pullies were pretty rusty, and probably got tossed. Nobody has committed to buying it yet, and I will have it at Pate swap meet unless it sells before then.

Random Guy · 04-23-2007, 08:56 PM

Quote:

Originally Posted by HuggerCST

The controls go with it, the compressor goes with it,(not locked up), even the uncut wiring harness goes with it, but the other pullies were pretty rusty, and probably got tossed. Nobody has committed to buying it yet, and I will have it at Pate swap meet unless it sells before then.

I am most interested in this, my only concern is that I have a 68. I dont know if the parts can be adapted and I have looked to see if its possible with little result. Any one help me out here?

retselgerg · 04-23-2007, 10:32 PM

interested in the ac and console More AC pix, and console pix please

HuggerCST · 04-23-2007, 10:57 PM

Quote:

Originally Posted by Random Guy

I am most interested in this, my only concern is that I have a 68. I dont know if the parts can be adapted and I have looked to see if its possible with little result. Any one help me out here?

As far as I know, everything is the same, and should bolt on, unless your cab is not an original A/C cab. If it's not, you will have to modify it, and you will have to have the pullies. This setup is off of a 69.

HuggerCST · 04-23-2007, 11:00 PM

Quote:

Originally Posted by retselgerg

interested in the ac and console More AC pix, and console pix please

I will work on pics, but I would rather not ship the A/C. I will have it at the swap meet though if you are going.

HuggerCST · 04-24-2007, 10:15 PM

I got some pics of the console. I'm leaving tomorrow, so I will PM you my cell # so you can call me if you are interested. I will be back sunday.

retselgerg · 04-24-2007, 10:52 PM

Nice piece but i will pass

04-07-2007, 10:51 AM	#26
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Parts for sale with possibly free delivery There is a member in Sevierville, but I can't think of his board name. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-07-2007, 12:16 PM	#28
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: Parts for sale with possibly free delivery If everyone passes on the floor let me know I will take it. If the beside sale does not go through either let me know I am a buyer.

04-08-2007, 12:51 AM	#29
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: Parts for sale with possibly free delivery if i cant find some one hugger i will be there in pigeon forge on the 20

04-08-2007, 05:39 PM	#30
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: Parts for sale with possibly free delivery I don't know if this will help but I will store it,but I'm about 190 miles south of Pigeon Forge and about 25-35 miles out of huggers path.I in lilburn ga if you want to do some mapquesting to see if it will work.let me know if I can help you. Mike

04-09-2007, 11:12 PM	#31
AuggieStyle Registered User Join Date: Apr 2007 Location: Dallas,TX. Posts: 499	Re: Parts for sale with possibly free delivery hugger I am in dallas and will be at pate at the end of the month, I hope to run into you maybe you will still have all the a/c parts i am interested. I just have a long shopping list; looking for a grille, front and rear bumpers, rally wheels deep rear small fronts. and of course the a/c drop me a line before pate let me know where you will be. thanx aug

04-13-2007, 12:21 AM	#32
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: Parts for sale with possibly free delivery hugger let me know where send you the money for the floor

04-20-2007, 02:54 PM	#33
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: Parts for sale with possibly free delivery I am interested in the A/C stuff. Are you including the control head and pulley with it?

04-23-2007, 10:32 PM	#36
retselgerg Registered User Join Date: Mar 2007 Location: Grundy Virginia Posts: 385	Re: Parts for sale with possibly free delivery interested in the ac and console More AC pix, and console pix please __________________ "OLE BLUE" Goodwrench 350, 5speed, Tilt, PS, PB, "some guys got into cars for money or girls but i got into cars because of the cars" -Jay Leno

04-24-2007, 10:15 PM	#39
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Parts for sale with possibly free delivery I got some pics of the console. I'm leaving tomorrow, so I will PM you my cell # so you can call me if you are interested. I will be back sunday. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-24-2007, 10:52 PM	#40
retselgerg Registered User Join Date: Mar 2007 Location: Grundy Virginia Posts: 385	Re: Parts for sale with possibly free delivery Nice piece but i will pass __________________ "OLE BLUE" Goodwrench 350, 5speed, Tilt, PS, PB, "some guys got into cars for money or girls but i got into cars because of the cars" -Jay Leno



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.