|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-01-2007, 05:27 PM
|
#1 |
|
Full Blown Rookie
Join Date: Mar 2007
Location: Antelope, CA
Posts: 20
|
A Nudder Nube Question
Keep in mind, learning as I go.
Stock 350. Adjusting the valves as they are rattling pretty good. I've got the service/shop manual and it basically lays it out step by step with one minor fact missing. How do I identify which valves are for Intake and Which are for exhaust. Also, I am assuming the following pattern for identifying the valves for cylinders 1-8 1 is 1st right when facing the motor from front of truck 2 is 1st left when facing the motor from front of truck 3 is 2nd right when facing the motor from front of truck 4 is 2nd left when facing the motor from front of truck etc etc etc . Am I correct on this? Now, if anyone knows which valves are intake and exhaust, stock heads, stock exhaust etc. Thanks Last edited by shadaway; 05-01-2007 at 05:27 PM. |
|
|
|
05-01-2007, 05:33 PM
|
#2 |
|
member #16
 
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: A Nudder Nube Question
With your valve covers off, just look at which valve lines up with each intake and exhaust port on the int. and ex. manifolds.
Cyls 1 3 5 7 are on the drivers side 2 4 6 8 pass side. Parts are designated by driver side or pass side.
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors  http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 05-01-2007 at 05:37 PM. |
|
|
|
|
05-01-2007, 05:34 PM
|
#3 |
|
Registered User
Join Date: Dec 2006
Location: New Mexico
Posts: 88
|
Re: A Nudder Nube Question
Well, look at the heads, and find the valves that line up with the ports on your ramhorns or your header tubes, and there's your exhaust valves. Hope this'll help you out there. Justin
__________________
'72 C/10 SWB 355/ broken TH350 and 3.07s   Soon to be 355/700r4 and 3.73s
|
|
|
|
|
05-01-2007, 06:40 PM
|
#4 |
|
Full Blown Rookie
Join Date: Mar 2007
Location: Antelope, CA
Posts: 20
|
Re: A Nudder Nube Question
Got it.
Yeah, that was too easy. It was a test. To see if you guys knew.  Thanks. |
|
|
|
|
05-01-2007, 07:45 PM
|
#5 | |
|
Parts and more parts
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
|
Re: A Nudder Nube Question
Quote:
|
|
|
|
|
|
05-02-2007, 09:02 AM
|
#6 | |
|
Registered User
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
|
Re: A Nudder Nube Question
Quote:
HAHAHAHAHAHAHAHAHA I love it... "Now that there was funny - I don't care who you are..."
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! |
|
|
|
|
|
05-02-2007, 09:40 AM
|
#7 | |
|
It's a catastrophic success.
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Re: A Nudder Nube Question
Quote:
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
