one quick question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cstm68 · 05-08-2007, 11:40 PM

does anyone have the dementions for the rear u bolts.
from inside to inside, the hight, and the diameter of the bolt

cstm68 · 05-09-2007, 10:44 PM

ttt

JimKshortstep4x4 · 05-10-2007, 05:16 AM

Is the u-bolt on a 2 WD or 4 WD?

Jim

sneakysnake · 05-10-2007, 10:07 AM

If you are looking for longer or blocks here is a site.
http://www.stockcarproducts.com/trkarm1.htm

**kwmech** · 05-10-2007, 10:19 AM

coil spring or leaf spring

cstm68 · 05-10-2007, 12:38 PM

coil spring 2wd

nvrforgotten52 · 05-10-2007, 01:17 PM

its a 3/4 inch stock... and if you know the width of the axle housing tube than you know the width from inside to inside...

sneakysnake · 05-10-2007, 03:13 PM

Quote:

Originally Posted by nvrforgotten52

its a 3/4 inch stock... and if you know the width of the axle housing tube than you know the width from inside to inside...

Because of the diagonal mount the "Ubolts" are just a little wider than the axle tubes but I dont remember the exact measurment.

05-08-2007, 11:40 PM	#1
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	one quick question. does anyone have the dementions for the rear u bolts. from inside to inside, the hight, and the diameter of the bolt __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

05-09-2007, 10:44 PM	#2
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: one quick question. ttt __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

05-10-2007, 05:16 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: one quick question. Is the u-bolt on a 2 WD or 4 WD? Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

05-10-2007, 10:07 AM	#4
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: one quick question. If you are looking for longer or blocks here is a site. http://www.stockcarproducts.com/trkarm1.htm

05-10-2007, 10:19 AM	#5
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	Re: one quick question. coil spring or leaf spring

05-10-2007, 12:38 PM	#6
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: one quick question. coil spring 2wd __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

05-10-2007, 01:17 PM	#7
nvrforgotten52 Registered User Join Date: Jan 2006 Location: Morro Bay C.A Posts: 179	Re: one quick question. its a 3/4 inch stock... and if you know the width of the axle housing tube than you know the width from inside to inside... __________________ '69 C10 SWB 350 edelbrock int/carb .420 .442 cam 700r4 70 lwb c10 work truck 250 I6 with two inch lift springs and a two inch bodylift and 33/12.5s



Register or Log In To remove these advertisements.