Pic needed of 4X4 standard trans hump

[Bus Ted Knuckle]

anybody have a pic of a 73 -87 high trans hump for 4x4? I need to see where the t-case shifter come through and mounts at. I have a non-4wd trans hump that I want to cut, bend, weld, and generally beat into submission so I can mount it in Draggin Wagon.

I really don't care what it looks like (I'll clean it up good and make it look decent), and I am a tight wad. I need to make do with what I have

Measurements would be great, but beggers can't be choosers

[xmuggsyx]

im not sure that i have the "high hump" in my truck(85-4sp 4x4) but ill go out and measure it today, my digital camera is busted but i can take pictures with the phone and get them on here, the quality might suffer a little. but ill have them and the measurements up later if u wanna keep an eye on this.

[Bus Ted Knuckle]

I really appreciate it muggs!

[Blazer1970]

NP205, NP203, NP208, and NVG241 all have different shifters that come up in different locations.

[Bus Ted Knuckle]

alright, mine is a 208. I can figgure this out on my own, I though somebody might have a pic of one laying around. I guess not though.

Muggs, I appreciate the help!

[CrashEd]

I got a 86 blazer with a 383,700r4, 208 in it. I can take pictures of were its mounted but its not a part its just my mud truck with bare floors.
Ed

[CrashEd]

Ed

[CrashEd]

hope this helps
Ed

[Bus Ted Knuckle]

Crash, SWEET. you are the man! Just the ticket. It looks like a will have to form a flatter area and a "bump" where the shifter mounts.

[xmuggsyx]

hey busted i know i was supposed to give this to you days ago but i wasnt able to get it on the computer until right now. anyway i made a diagram on paint for you, and it was too large to post on this page and i wrote notes and stuff on it so it needed to be larger, so i put it on a photobucket account, the login name is xchevytruckx and the password is bowtie sorry to make you have to go through all that. but if u login to it im sure it will do everything u need as far as measurements go. the pictures from my phone were about 1" by 1" so they wouldnt help at all. anyway
www.Photobucket.com
login: xchevytruckx
Pass: bowtie
if you go to it, click the image and it will get larger, one more click and it enlarges to 100%. its the only one on that account. the number under the 4sp shifter oval is 7/8" and the width of the 4x4 shifter is 3.25 but it was slightly under 3.25" and the measurements while very close were put off slightly by the floormat. and as it says in the diagram the grey line was a string i put up to have a constant mark, theres a great description of everything i think you will need. let me know if i missed anything and i will try to add it or let you know tonight or tome afternoon, thanks -muggs

[xmuggsyx]

right didnt think of it before but heres a direct link to the pic, just click the link and then click the pic to enlarge it... http://i193.photobucket.com/albums/z...g?t=1178926587

[Bus Ted Knuckle]

Muggs, that is some awsome work on that diagram. Everybody should check that out. THANKS MAN!!!

[CrashEd]

WOW nice work on the diagram! Its awsome that you would take the time to do that for a fellow 4x4er And board member.

Ed

[xmuggsyx]

its all about the bowtie lol. seriously, i hope its everything u need. good luck on the beating it into submission lol. if theres anything else i can do let me know

[Bus Ted Knuckle]

Will do Muggs, I do really apreciate your help, and everyone else's help too