3.73 POSI Rear - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WORNBRAKES · 05-05-2007, 06:59 PM

Pulled from a 70 K10.
6 Lug, leaf
Brakes shoud be redone.

$225.00 OBRO
Paypal, Cash or M/O

I will ship if you make the arrangments and pay the freight company.
Thanks

Sorry, It is the middle axle in the pic.

WORNBRAKES · 05-08-2007, 06:56 PM

Ttt

**67 cst swb** · 05-09-2007, 02:11 AM

How much to pull the gear, pinion, & Posi unit, and ship?

WORNBRAKES · 05-09-2007, 11:27 AM

I would like 150.00 for the ring, pinion, and posi carrier. The rest would be scrap at that point. Guessing on weight, shipping would be 40.00 DHL ground as long as it is not over 90 pounds. I have a hard plastic shipping container that I would ship it in. I would need the empty container shipped back which would be around 10.00.

**67 cst swb** · 05-09-2007, 01:52 PM

Let me think about it, funds getting low... I'll let you know by Sun..

WORNBRAKES · 05-09-2007, 06:14 PM

ALL,
I would really rather not pull the carrier from the axle. I would like to sell it as a whole. If I pull it, the rest would just about have to be scrapped.
I am going to give it some time to sell as it is. If not then I will part it at that time.

Measurements that have been requested.

outside drum to outside drum-62''
axle tube- 57''
backing plate to center of spring perch- 8 1/4''
center of perch to center of perch- 40''
Thanks

**67 cst swb** · 05-09-2007, 06:22 PM

That's cool with me...

WORNBRAKES · 05-20-2007, 11:41 PM

POSI is SOLD to ME!

Wife says I can keep it for the Blazer as she liked our little 2wd mud excursion this evening.

http://www.67-72chevytrucks.com/vboa...d.php?t=241872

05-05-2007, 06:59 PM	#1
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	3.73 POSI Rear Pulled from a 70 K10. 6 Lug, leaf Brakes shoud be redone. $225.00 OBRO Paypal, Cash or M/O I will ship if you make the arrangments and pay the freight company. Thanks Sorry, It is the middle axle in the pic. Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins Last edited by WORNBRAKES; 05-06-2007 at 12:16 AM.

05-08-2007, 06:56 PM	#2
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: 3.73 POSI Rear Ttt __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

05-09-2007, 02:11 AM	#3
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 3.73 POSI Rear How much to pull the gear, pinion, & Posi unit, and ship? __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

05-09-2007, 11:27 AM	#4
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: 3.73 POSI Rear I would like 150.00 for the ring, pinion, and posi carrier. The rest would be scrap at that point. Guessing on weight, shipping would be 40.00 DHL ground as long as it is not over 90 pounds. I have a hard plastic shipping container that I would ship it in. I would need the empty container shipped back which would be around 10.00. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

05-09-2007, 01:52 PM	#5
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 3.73 POSI Rear Let me think about it, funds getting low... I'll let you know by Sun.. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

05-09-2007, 06:14 PM	#6
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: 3.73 POSI Rear ALL, I would really rather not pull the carrier from the axle. I would like to sell it as a whole. If I pull it, the rest would just about have to be scrapped. I am going to give it some time to sell as it is. If not then I will part it at that time. Measurements that have been requested. outside drum to outside drum-62'' axle tube- 57'' backing plate to center of spring perch- 8 1/4'' center of perch to center of perch- 40'' Thanks __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

05-09-2007, 06:22 PM	#7
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 3.73 POSI Rear That's cool with me... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

05-20-2007, 11:41 PM	#8
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: 3.73 POSI Rear POSI is SOLD to ME! Wife says I can keep it for the Blazer as she liked our little 2wd mud excursion this evening. http://www.67-72chevytrucks.com/vboa...d.php?t=241872 __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins Last edited by WORNBRAKES; 05-20-2007 at 11:42 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.