drug home a new project! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

55dude · 05-03-2007, 10:34 AM

dudes! found a 54' burb on craigslist and went to look damm! wouldn't ya know it i bought it. guy was selling it because he found out his girlfriend was pregnant. well he was asking $450 but ended up up getting it for $300 bucks. 235 turns by hand going to see if it will start probably going to use a 250/350 combo i happen to have stashed. here are some pic's.

CAL 58 GMC · 05-03-2007, 11:47 AM

Other then a fender, I would say, WOW what a find!!

Kabwe · 05-03-2007, 11:50 AM

That is a really great find. I love those old burbs.

jsbgump · 05-03-2007, 12:24 PM

Nice find

55dude · 05-03-2007, 12:31 PM

other fender is in the back with the wrong year grill 47'-53) and running board. need to find a 54'-55' grille. anyone? should find out next week if it runs or not.

Daniel U · 05-03-2007, 03:22 PM

Quote:

Originally Posted by 55dude

other fender is in the back with the wrong year grill 47'-53) and running board. need to find a 54'-55' grille. anyone? should find out next week if it runs or not.

They do sell new ones for $650-ish. My mom may be getting one. What's left of her OEM one is rough, but you could paint it. If they get a new one and are interested in selling it, I'll let you know.

**BobTheTrucker** · 05-09-2007, 01:58 PM

Looks like a fun project. My experience with 235 ( I have 5 of them ) is if they turn over real easy by hand. More than likely the lifters are not pumped up and the valves are not opening. If that's the case and it's not the pistons and rings. She may start right up, if not. Then all you may need to get her started is a clean oil pan and screen so oil pressure can pump up the lifters and let the valves open and close properly.
Most didn't come with oil filters and sludge builds up over the years, even if they changed the oil. It usually stops up the oil pump screen. Low oil pressure no compression. Also this will some times burn the crank and you can't get good oil pressure to get those valves working with burnt bearings on the cam or crank.

**BobTheTrucker** · 05-09-2007, 02:08 PM

You have a 54, I'm not sure but I don't think it has an oil pump. ??? If it doesn't it has a splash system. So good crank and cam bearings or even more important.

**BobTheTrucker** · 05-09-2007, 02:16 PM

Another thing if she don't start right up is to pull the dist. out and use a drill with a long cut off straight slot screw driver end on it to pump up oil pressure. Of course you checked to see if you have fuel and fire first.

55dude · 05-11-2007, 10:02 AM

the dizzy will be pulled because i have a test HEI that i have just for starting 235's. they need to be reprimed after they sit and why mess with a bunch of old stuff roll in some fresh plugs and HEI saves lots of time.

solidaxel · 05-11-2007, 04:47 PM

What type of HEI are you using for the I-6

texascowboy593 · 05-11-2007, 04:54 PM

Wow...Very nice! Here's one I saw last weekend to give you a little inspiration...

1st pic is a little vague...He's behind me going down the road!

55dude · 05-22-2007, 07:18 AM

latest update on the project: scored a 54' grille,front valance,left front fender for under $200 bucks. also scored a running 61' chevy apache truck for $100 bucks today and drove it home. 235/3spd that's going in the 54' i will post some pic's soon.

05-03-2007, 10:34 AM	#1
55dude Registered User Join Date: Jan 2007 Location: tacoma wa. Posts: 1,037	drug home a new project! dudes! found a 54' burb on craigslist and went to look damm! wouldn't ya know it i bought it. guy was selling it because he found out his girlfriend was pregnant. well he was asking $450 but ended up up getting it for $300 bucks. 235 turns by hand going to see if it will start probably going to use a 250/350 combo i happen to have stashed. here are some pic's. Attached Images

05-03-2007, 11:47 AM	#2
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: drug home a new project! Other then a fender, I would say, WOW what a find!! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

05-03-2007, 11:50 AM	#3
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: drug home a new project! That is a really great find. I love those old burbs.

05-03-2007, 12:24 PM	#4
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: drug home a new project! Nice find __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

05-03-2007, 12:31 PM	#5
55dude Registered User Join Date: Jan 2007 Location: tacoma wa. Posts: 1,037	Re: drug home a new project! other fender is in the back with the wrong year grill 47'-53) and running board. need to find a 54'-55' grille. anyone? should find out next week if it runs or not. Last edited by 55dude; 05-03-2007 at 12:32 PM.

05-09-2007, 01:58 PM	#7
BobTheTrucker Registered User Join Date: Feb 2006 Location: South Louisiana Posts: 87	Re: drug home a new project! Looks like a fun project. My experience with 235 ( I have 5 of them ) is if they turn over real easy by hand. More than likely the lifters are not pumped up and the valves are not opening. If that's the case and it's not the pistons and rings. She may start right up, if not. Then all you may need to get her started is a clean oil pan and screen so oil pressure can pump up the lifters and let the valves open and close properly. Most didn't come with oil filters and sludge builds up over the years, even if they changed the oil. It usually stops up the oil pump screen. Low oil pressure no compression. Also this will some times burn the crank and you can't get good oil pressure to get those valves working with burnt bearings on the cam or crank. __________________ 1955 Chevy truck ( SOLD ) 1955 3/4 ton parts truck. 1957 Chevy truck 1995 S10 Chevy truck 1999 ext cab Chevy truck, w/1998 body style. (for parts) 1964 Honda 90 2003 Ultra Classic Harley

05-09-2007, 02:08 PM	#8
BobTheTrucker Registered User Join Date: Feb 2006 Location: South Louisiana Posts: 87	Re: drug home a new project! You have a 54, I'm not sure but I don't think it has an oil pump. ??? If it doesn't it has a splash system. So good crank and cam bearings or even more important. __________________ 1955 Chevy truck ( SOLD ) 1955 3/4 ton parts truck. 1957 Chevy truck 1995 S10 Chevy truck 1999 ext cab Chevy truck, w/1998 body style. (for parts) 1964 Honda 90 2003 Ultra Classic Harley

05-09-2007, 02:16 PM	#9
BobTheTrucker Registered User Join Date: Feb 2006 Location: South Louisiana Posts: 87	Re: drug home a new project! Another thing if she don't start right up is to pull the dist. out and use a drill with a long cut off straight slot screw driver end on it to pump up oil pressure. Of course you checked to see if you have fuel and fire first. __________________ 1955 Chevy truck ( SOLD ) 1955 3/4 ton parts truck. 1957 Chevy truck 1995 S10 Chevy truck 1999 ext cab Chevy truck, w/1998 body style. (for parts) 1964 Honda 90 2003 Ultra Classic Harley

05-11-2007, 10:02 AM	#10
55dude Registered User Join Date: Jan 2007 Location: tacoma wa. Posts: 1,037	Re: drug home a new project! the dizzy will be pulled because i have a test HEI that i have just for starting 235's. they need to be reprimed after they sit and why mess with a bunch of old stuff roll in some fresh plugs and HEI saves lots of time. Last edited by 55dude; 05-11-2007 at 10:02 AM.

05-11-2007, 04:47 PM	#11
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: drug home a new project! What type of HEI are you using for the I-6 __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

05-11-2007, 04:54 PM	#12
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: drug home a new project! Wow...Very nice! Here's one I saw last weekend to give you a little inspiration... 1st pic is a little vague...He's behind me going down the road! Attached Images __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

05-22-2007, 07:18 AM	#13
55dude Registered User Join Date: Jan 2007 Location: tacoma wa. Posts: 1,037	Re: drug home a new project! latest update on the project: scored a 54' grille,front valance,left front fender for under $200 bucks. also scored a running 61' chevy apache truck for $100 bucks today and drove it home. 235/3spd that's going in the 54' i will post some pic's soon.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.