|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-21-2007, 01:34 AM
|
#1 |
|
Senior Member
Join Date: Feb 2007
Location: Seattle, WA
Posts: 458
|
Best shocks for a 3/4 drop?
 I need new shocks and, since I have a 3/4 now, want to make sure I do the right thing when replacing the old stock ones. What's the recommended set-up? Do I need to relocate the shocks? Are there special shocks to order when you are lowered? Any and all info would be appreciated. -- mark Pic below just because I like seeing my truck 
__________________
1970 C10 
|
|
|
|
05-21-2007, 01:38 AM
|
#2 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: Best shocks for a 3/4 drop?
I'd go with the shock relocater kit and the KYB shocks from ECE
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
05-21-2007, 12:35 PM
|
#3 |
|
It Is What It Is,,,,
Join Date: Aug 2006
Location: *The Gun Shine State*Florida*
Posts: 1,765
|
Re: Best shocks for a 3/4 drop?
I went with the Cal-Max from DJM,, good ride,, I like them, and NO relocatation of the shock either.
__________________
*79 C10 Short Box ST8 6 bang'r * *Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT *__--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............|_(O)_ |___(O) ] FAQ INDEX Thread The Kulture  My Rat Den
|
|
|
|
|
05-21-2007, 07:19 PM
|
#4 |
|
Senior Member
Join Date: Feb 2007
Location: Seattle, WA
Posts: 458
|
Re: Best shocks for a 3/4 drop?
Can you all educate me about relocation: What's the reason? Is it mandatory? How hard is it to do? Etc., etc. Of course, I could go look this all up. But I am laaaaazy.
__________________
1970 C10
|
|
|
|
|
05-21-2007, 07:50 PM
|
#5 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Best shocks for a 3/4 drop?
relocation is easy for the rear shocks and the reason its done is to correct the angle of the shock to get the most out of what you're paying for// i went with the kbyshocks also the rear relocator
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
05-21-2007, 07:53 PM
|
#6 |
|
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
Re: Best shocks for a 3/4 drop?
kyb's and relocator from ECC here too. simple bolt on.
|
|
|
|
|
05-22-2007, 12:03 AM
|
#7 |
|
Senior Member
Join Date: Feb 2007
Location: Seattle, WA
Posts: 458
|
Re: Best shocks for a 3/4 drop?
So only the rears need relocating then?
__________________
1970 C10
|
|
|
|
|
05-22-2007, 07:44 AM
|
#8 |
|
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: Best shocks for a 3/4 drop?
Yes, only rears need relocators but you are borderline at 4" drop. The kit is the best deal if you decide to use the relocators. If you decide to buy shocks only, you can order KYB shocks from Advance Auto parts (with free shipping) cheaper than places like ECE.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 05-22-2007 at 07:51 AM. |
|
|
|
|
05-22-2007, 10:02 AM
|
#9 |
|
Senior Member
Join Date: Feb 2007
Location: Seattle, WA
Posts: 458
|
Re: Best shocks for a 3/4 drop?
Thanks 70c10. I think I'm going with just the shocks since I'm only a 4" drop. Can't say how much I appreciate the responses/advice from all of you -- thanks!
__________________
1970 C10
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
