How low can ya go !!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spray-Bomb · 05-19-2007, 01:04 AM

Ok, I have a few questions

If I were to do a "reverse" cup like this

Quote:

Originally Posted by camaro__thunder

CHECK THESE OUT

And run RE-6's how low could I go without drop spindles

I want to know about how low at dump & about what ride would be
I don't wanna go down the road with camber, so I guess it should be "How low without wearing my tires out fast"

I don't know what size tires I would run, but just tell me what you're run'n & that'll be good enough

Thanks, Matt

Spray-Bomb · 05-19-2007, 09:35 PM

ttt

EAST SIDE LOW LIFE · 05-19-2007, 09:47 PM

Legally you can not have anything (example front sway bar) lower then the bottom of your rim. This is referred to as the scrub line.

esll.

pharcydekm · 05-19-2007, 10:15 PM

Legally you can't have... shaved markers, door handles, mirrors etc...

krue · 05-19-2007, 10:59 PM

Legally it's different every where you go.

BigTruckDriver · 05-19-2007, 11:02 PM

Quote:

Originally Posted by EAST SIDE LOW LIFE

Legally you can not have anything (example front sway bar) lower then the bottom of your rim.

esll.

Forget legally its just not smart!

East Side Low Life,I like your avatar! What you know about that?

*Shane* · 05-19-2007, 11:34 PM

Quote:

Originally Posted by pharcydekm

Legally you can't have... shaved markers, door handles, mirrors etc...

Shaved markers and shaved door handles are not legally required.

ONE exterior mirror is.

EAST SIDE LOW LIFE · 05-20-2007, 04:19 AM

Quote:

Originally Posted by BigTruckDriver

Forget legally its just not smart!

East Side Low Life,I like your avatar! What you know about that?

**********************************************************

Well thank you Big Trucker. This is a vintage set of goggles, gloves and helmet. I'm starting to collect this stuff ....

esll.

gringoloco · 05-20-2007, 02:21 PM

More than 3" or so of spring drop will cause you alignment problems up front- i.e. camber, caster, and bump steer problems. Any more than 3" should come from spindles or crossmember sectioning or frame Zing.

edflores · 05-20-2007, 06:43 PM

re-6's do not belong on full sizes. and you will drag on the ground way before you air out with those "cups" just z it. :}

bedsled71 · 05-20-2007, 06:49 PM

you can use 6's on a full size. ive had mine on for years. you will get more lift with the 7's though. but if thats what you got then its good.. you will have to run more pressure to get the extra height

Spray-Bomb · 05-20-2007, 10:46 PM

Quote:

Originally Posted by gringoloco

More than 3" or so of spring drop will cause you alignment problems up front- i.e. camber, caster, and bump steer problems. Any more than 3" should come from spindles or crossmember sectioning or frame Zing.

Thanks

camaro__thunder · 05-21-2007, 06:14 PM

This is the truck those are on.

camaro__thunder · 05-21-2007, 06:14 PM

http://www.nfamusairsuspension.com/page7.htm

Spray-Bomb · 05-21-2007, 09:25 PM

Cool truck !!!

bagged69c10 · 05-21-2007, 09:51 PM

Thats not his truck. Its keiths from nfamous air suspension in Mansfield, Tx.

Spray-Bomb · 05-21-2007, 10:59 PM

Quote:

Originally Posted by bagged69c10

Thats not his truck. Its keiths from nfamous air suspension in Mansfield, Tx.

Thanks, I just edited my post ( I hate looking stupid)

camaro__thunder · 05-22-2007, 01:05 AM

never claimed it to be, and yes Keith is a cool guy! Go to the site and checkout his work.

Spray-Bomb · 05-23-2007, 12:59 AM

Quote:

Originally Posted by camaro__thunder

never claimed it to be, and yes Keith is a cool guy! Go to the site and checkout his work.

I know, I just thought it was your

But then he corrected me & i remembered what yours looked like

Sometimes I wonder about myself

05-19-2007, 09:35 PM	#2
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: How low can ya go !!! ttt __________________ Just not low enough... ----------------------------- Sinister Killer

05-19-2007, 09:47 PM	#3
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: How low can ya go !!! Legally you can not have anything (example front sway bar) lower then the bottom of your rim. This is referred to as the scrub line. esll. __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member) Last edited by EAST SIDE LOW LIFE; 05-20-2007 at 04:12 AM.

05-19-2007, 10:15 PM	#4
pharcydekm Registered User Join Date: May 2003 Location: Englewood, CO Posts: 146	Re: How low can ya go !!! Legally you can't have... shaved markers, door handles, mirrors etc...

05-19-2007, 10:59 PM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: How low can ya go !!! Legally it's different every where you go. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-20-2007, 02:21 PM	#9
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How low can ya go !!! More than 3" or so of spring drop will cause you alignment problems up front- i.e. camber, caster, and bump steer problems. Any more than 3" should come from spindles or crossmember sectioning or frame Zing. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-20-2007, 06:43 PM	#10
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: How low can ya go !!! re-6's do not belong on full sizes. and you will drag on the ground way before you air out with those "cups" just z it. :}

05-20-2007, 06:49 PM	#11
bedsled71 Registered User Join Date: Feb 2007 Location: yuma arizona Posts: 448	Re: How low can ya go !!! you can use 6's on a full size. ive had mine on for years. you will get more lift with the 7's though. but if thats what you got then its good.. you will have to run more pressure to get the extra height

05-21-2007, 06:14 PM	#13
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: How low can ya go !!! This is the truck those are on. __________________ My Project 69 SWB SHAVED BAGGED DOORED

05-21-2007, 06:14 PM	#14
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: How low can ya go !!! http://www.nfamusairsuspension.com/page7.htm __________________ My Project 69 SWB SHAVED BAGGED DOORED

05-21-2007, 09:25 PM	#15
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: How low can ya go !!! Cool truck !!! __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 05-21-2007 at 10:58 PM.

05-21-2007, 09:51 PM	#16
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	Re: How low can ya go !!! Thats not his truck. Its keiths from nfamous air suspension in Mansfield, Tx. __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD! 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck Last edited by bagged69c10; 05-21-2007 at 09:52 PM.

05-22-2007, 01:05 AM	#18
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: How low can ya go !!! never claimed it to be, and yes Keith is a cool guy! Go to the site and checkout his work. __________________ My Project 69 SWB SHAVED BAGGED DOORED Last edited by camaro__thunder; 05-22-2007 at 01:06 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.