Have doughts about your Temp gauge. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Chevy Fleetside** · 05-20-2007, 12:44 PM

These might be an easy way to see if it is working properly. I say not to much money to save a head gasket replacement, or even a warped head replacement, or worse.. They are a 16 PSI cap so make sure you can use it before buying it.. http://store.summitracing.com/partde...5&autoview=sku

Tomsriv · 05-23-2007, 12:40 AM

Thats a lot quicker to install than the thermostat housing with the temp gauge on it.

**Chevy Fleetside** · 05-23-2007, 09:43 AM

I noticed they had some that were 13 PSI also.. So they may even have some with less if you call and ask..

05-20-2007, 12:44 PM	#1
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Have doughts about your Temp gauge. These might be an easy way to see if it is working properly. I say not to much money to save a head gasket replacement, or even a warped head replacement, or worse.. They are a 16 PSI cap so make sure you can use it before buying it.. http://store.summitracing.com/partde...5&autoview=sku Attached Images Last edited by Chevy Fleetside; 05-20-2007 at 12:46 PM.

05-23-2007, 12:40 AM	#2
Tomsriv Registered User Join Date: Apr 2007 Location: Camarillo, CA Posts: 257	Re: Have doughts about your Temp gauge. Thats a lot quicker to install than the thermostat housing with the temp gauge on it.

05-23-2007, 09:43 AM	#3
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: Have doughts about your Temp gauge. I noticed they had some that were 13 PSI also.. So they may even have some with less if you call and ask..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.