Dooh... Stupid me... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TonyJohnson · 05-25-2007, 09:59 PM

Yesterday, I decided the Blaze was due for a tuneup and I installed plugs, new wires, new cap, coil and rotor. I had decided to do everything right, so I anti-seized the plugs, dialectic greased the wires on both ends, routed the wires neatly and had everything looking good. The only issue (I thought...) was the cap hold-down screw at one o'clock on the distributor. It's really squeezed back against the firewall because the HEI cap is so big and I just couldn't get a screwdriver on it to lock it back down. I jacked around for about an hour trying different combos and finally cut a handle off a cheap flat-blade and wrapped the end with some black tape to get a grip and FINALLY it worked... Here I am feeling all proud of my self and fired it up. Damn it was missing. Sounded like it was running on 4 cylinders. Looked at the wires 4 times before I realized I had switched 6 and 8... Dooh... Anyway, it runs a lot better now with the firing order correct.

krue · 05-25-2007, 10:13 PM

I know the feeling on doing goofy stuff.

Longhorn Man · 05-25-2007, 11:39 PM

you may want to wipe the die-electric stuff outta the cap end of the wires. It reallymakes them wanna pop off.

TonyJohnson · 05-26-2007, 01:59 AM

Quote:

Originally Posted by Longhorn Man

you may want to wipe the die-electric stuff outta the cap end of the wires. It reallymakes them wanna pop off.

Good point. But he cap I got from Summit has a hold down ring for the top of the HEI, so I think I'll be alright.

GREASEMONKEY72 · 05-26-2007, 02:02 AM

those little goof ups make it fun sometimes and always keep it interesting

RACINJASON22 · 05-26-2007, 03:04 AM

Been there done that. Opps! atleast ya caught it before ya took that cap hold down back off

You may have had to deface another tool for the job

RJ22...

cameeks · 05-26-2007, 03:13 AM

I was changing the header gasket in my old 78 Camaro and when I was done I hurryed and fired it up. It sounded a little funny (quieter) but was running smooth. I looked under the hood and saw all the pass. side wires laying on the air cleaner.

I was running a true 4 cyl.

oldschooler · 05-26-2007, 04:59 AM

I put an engine in a chevy van one time, in through the side door. Not alot of fun. Put new plugs, wires and dizzy cap on. Tried to start it, and is all it would do is turn over, no fire. Re-checked wire install everything was fine. Tried too start again, same thing no fire. So I went through the procedure of bringing up #1 and pulling dizzy and re- checking dizzy install. Tried to start and same thing no fire. My buddy stuck his head in the passenger window, asking what else we could try. When I looked over to him to talk, I happened to see th rotor button laying on passenger seat. I installed that very little, but very important part, and it fired right up. So I know the humiliation you are feeling brother.

Captain Knievel · 05-26-2007, 08:49 AM

I keep this in the glove box and taught my girls to remember it for when I get old and senile and forget where I put it.

AR15DEFENSE · 05-26-2007, 10:07 AM

been there.. did you know on an olds small block you can switch #'s 5 and 7 and the motor does not sound like it's missing at all? just a lack of power as it's only running on 6 cylinders. I do.

05-25-2007, 10:13 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Dooh... Stupid me... I know the feeling on doing goofy stuff. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-25-2007, 11:39 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Dooh... Stupid me... you may want to wipe the die-electric stuff outta the cap end of the wires. It reallymakes them wanna pop off.

05-26-2007, 02:02 AM	#5
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Dooh... Stupid me... those little goof ups make it fun sometimes and always keep it interesting __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

05-26-2007, 03:04 AM	#6
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: Dooh... Stupid me... Been there done that. Opps! atleast ya caught it before ya took that cap hold down back off You may have had to deface another tool for the job RJ22... __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

05-26-2007, 03:13 AM	#7
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Dooh... Stupid me... I was changing the header gasket in my old 78 Camaro and when I was done I hurryed and fired it up. It sounded a little funny (quieter) but was running smooth. I looked under the hood and saw all the pass. side wires laying on the air cleaner. I was running a true 4 cyl. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

05-25-2007, 09:59 PM	#1
TonyJohnson Registered User Join Date: Mar 2003 Location: Cheboygan, MI Posts: 998	Dooh... Stupid me... Yesterday, I decided the Blaze was due for a tuneup and I installed plugs, new wires, new cap, coil and rotor. I had decided to do everything right, so I anti-seized the plugs, dialectic greased the wires on both ends, routed the wires neatly and had everything looking good. The only issue (I thought...) was the cap hold-down screw at one o'clock on the distributor. It's really squeezed back against the firewall because the HEI cap is so big and I just couldn't get a screwdriver on it to lock it back down. I jacked around for about an hour trying different combos and finally cut a handle off a cheap flat-blade and wrapped the end with some black tape to get a grip and FINALLY it worked... Here I am feeling all proud of my self and fired it up. Damn it was missing. Sounded like it was running on 4 cylinders. Looked at the wires 4 times before I realized I had switched 6 and 8... Dooh... Anyway, it runs a lot better now with the firing order correct. __________________ Tony Johnson -- '71 Blazer w/L-31 Vortec 350, SM465, NP205, performer intake, edelbrock 1406, HEI, 4" lift, Boyd EFI tank, Vintage A/C My Blazer --

05-26-2007, 04:59 AM	#8
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: Dooh... Stupid me... I put an engine in a chevy van one time, in through the side door. Not alot of fun. Put new plugs, wires and dizzy cap on. Tried to start it, and is all it would do is turn over, no fire. Re-checked wire install everything was fine. Tried too start again, same thing no fire. So I went through the procedure of bringing up #1 and pulling dizzy and re- checking dizzy install. Tried to start and same thing no fire. My buddy stuck his head in the passenger window, asking what else we could try. When I looked over to him to talk, I happened to see th rotor button laying on passenger seat. I installed that very little, but very important part, and it fired right up. So I know the humiliation you are feeling brother.

05-26-2007, 08:49 AM	#9
Captain Knievel Senior Member Join Date: Feb 2007 Location: Seattle, WA Posts: 458	Re: Dooh... Stupid me... I keep this in the glove box and taught my girls to remember it for when I get old and senile and forget where I put it. Attached Images __________________ 1970 C10

05-26-2007, 10:07 AM	#10
AR15DEFENSE Resident Absorber Join Date: Mar 2007 Location: WI Posts: 131	Re: Dooh... Stupid me... been there.. did you know on an olds small block you can switch #'s 5 and 7 and the motor does not sound like it's missing at all? just a lack of power as it's only running on 6 cylinders. I do. __________________ The best offense is a better DEFENSE!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.