Converting an auto trans truck to stick?

[1969k10stepside]

If you are going to use the granny first gear SM465 you will need to put in a "high hump" floor.To do that...you will need to cut a hole in the floor and drill holes for the bolts that hold down the hump.Then you just have to buy the floor hump.Thats the mod to the cab you will have to do

[71chevylowrider]

I found a very good deal on a manual transmission column for you.


http://portland.craigslist.org/clc/pts/339779786.html

[dubs68SWB]

My Gosh.....why would you want a "3 on the tree"????? Put the linkage on the floor. You will need to do some fab work on the shifter arm because, if you have a bench seat like I do, it's a long ways from the shifter to the top of your seat.

To answer another question......The granny 4 speeds are very short which is why the crossmember is almost under the firewall. You will have to use the style that goes under the tailshaft. You are not limited to a truck x-member though. Before I used the GMC one I had, I threw a '68 Camaro x-member under there and it would have worked with no mods. The only thing is that you may have needed to shim it a bit to get the angle you were looking for.

If you are thinking about any kind of a close ratio 4 speed like a Munice 21 or 22, stay off the column shift cuz you will look funny going down the road trying to shift fast enough....people might think you are having a medical event!!!!! LOL

[72 cheyenne pdx]

Another option you might want to do is keep it as an automatic and put a floor shifter kit on it.