SBC Magnesium valve covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

powell72 · 05-30-2007, 11:41 PM

These are the magnesium covers found on 84-86 'Vettes. They are driver's quality, I painted them with a high heat paint and high heat clear. The one corner has a chip out of it, it doesn't affect sealing, I just stuck that one to the back. I had these on my truck. Valve covers, pcv grommet, breather, factory oil cap(not needed), and eight stainless buttonhead bolts- $50 shipped.

svgould · 05-31-2007, 11:10 AM

Are you saying that the factory oil cap is included or that it is just not needed? Do you take Paypal?

**ScottH** · 05-31-2007, 11:33 AM

Put me in line if svgould passes.

Thanks.

70rs/ss · 05-31-2007, 05:51 PM

thirds? If it gets to me, PM me!!

svgould · 05-31-2007, 07:35 PM

I'll step out of line so their all yours ScottH

**ScottH** · 05-31-2007, 09:25 PM

Please PM me payment info.

Thanks.

powell72 · 06-01-2007, 12:05 AM

The factory oil cap is not needed, the breather I have on there goes in place of the oil cap, I'm just including the 'Vette oil cap because I have no use for it. ScottH, sending pm.......

earl87gta · 06-02-2007, 05:45 PM

thats a great deal considering there 110 each side at the dealer. I have a set on the 68 firebird that have been polished if you have a TPI these match the plenum and look great with it.

powell72 · 06-02-2007, 11:00 PM

Thanks for the plug.

BTW, sale pending to ScottH.

BIGCHEVYMAN · 06-02-2007, 11:03 PM

Do you still have these?

**ScottH** · 06-02-2007, 11:05 PM

Chris, paypal payment will be sent tomorrow.

Thanks.

Scott

05-30-2007, 11:41 PM	#1
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	SBC Magnesium valve covers These are the magnesium covers found on 84-86 'Vettes. They are driver's quality, I painted them with a high heat paint and high heat clear. The one corner has a chip out of it, it doesn't affect sealing, I just stuck that one to the back. I had these on my truck. Valve covers, pcv grommet, breather, factory oil cap(not needed), and eight stainless buttonhead bolts- $50 shipped. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

05-31-2007, 11:10 AM	#2
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Re: SBC Magnesium valve covers Are you saying that the factory oil cap is included or that it is just not needed? Do you take Paypal? __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

05-31-2007, 11:33 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: SBC Magnesium valve covers Put me in line if svgould passes. Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-31-2007, 05:51 PM	#4
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: SBC Magnesium valve covers thirds? If it gets to me, PM me!!

05-31-2007, 07:35 PM	#5
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Re: SBC Magnesium valve covers I'll step out of line so their all yours ScottH __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

05-31-2007, 09:25 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: SBC Magnesium valve covers Please PM me payment info. Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

06-01-2007, 12:05 AM	#7
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: SBC Magnesium valve covers The factory oil cap is not needed, the breather I have on there goes in place of the oil cap, I'm just including the 'Vette oil cap because I have no use for it. ScottH, sending pm....... __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

06-02-2007, 05:45 PM	#8
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: SBC Magnesium valve covers thats a great deal considering there 110 each side at the dealer. I have a set on the 68 firebird that have been polished if you have a TPI these match the plenum and look great with it. __________________ Earl 68 2500 4x4 GMC Burb

06-02-2007, 11:00 PM	#9
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: SBC Magnesium valve covers Thanks for the plug. BTW, sale pending to ScottH. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

06-02-2007, 11:03 PM	#10
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: SBC Magnesium valve covers Do you still have these?

06-02-2007, 11:05 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: SBC Magnesium valve covers Chris, paypal payment will be sent tomorrow. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 06-02-2007 at 11:07 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.