67 chevy lowrider project RHINO - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**John Fabris** · 06-05-2007, 11:13 AM

It is your truck, do what you want...

I have seen a rat rod that was bed lined (over the entire car) and it did not look too bad.

72 cheyenne pdx · 06-05-2007, 12:01 PM

It is your truck. You can do what ever you want to it. I say go for it.

revn67 · 06-05-2007, 12:16 PM

spend the 1500 to 2000 on air suspension and then it'll be the start of your name for your project...lowrider, rhino sounds like a bad idea for anything but something that stays in the woods or on a mountain for a truck....bad idea

Luvlegs · 06-05-2007, 01:39 PM

Each to their own but, if you were a child, pet, student or spouse of mine, you'd get the rolled up newspaper treatment.... a little smack on the end of the nose and a resounding "nnno!"

chevyboy55 · 06-05-2007, 05:23 PM

Quote:

Originally Posted by 72 cheyenne pdx

It is your truck. You can do what ever you want to it. I say go for it.

I agree.

68GMC454 · 06-05-2007, 05:42 PM

interesting..if its already rusty,,then yes go for it..but i can tell you from experiance, you will spend alot of money and time to sand it back off...it took me almost a week to get just one door and fender sanded off,,the crap is hard on sand paper..personally on a 4x4,,it rocks,,,if its doen right, you shouldnt be able to tear it off..lol
billy

Bamm · 06-05-2007, 05:49 PM

My 2 cents. If you have your heart set on it and that's what you want, then by all means have at it. As long as you know what the consequences are if a year later you don't like it. Personally I agree with revn67, if it's gonna cost $1500 - 2500 like some of these guys think, that money would be (to me) better off spent in a nice suspension and wheels..,.......JB

dubs68SWB · 06-05-2007, 08:22 PM

I apologize for my fellow truckers not using too much tact in telling you it is probably not a good idea. I also have a large network here in my city. I'm sure if you were to cut down on whatever it is you are shooting, smoking or drinking, we could sell the remainder and get you enough money for a real paint job.

06-05-2007, 11:13 AM	#26
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: 67 chevy lowrider project RHINO It is your truck, do what you want... I have seen a rat rod that was bed lined (over the entire car) and it did not look too bad. __________________ John Fabris 67 C10 SWB

06-05-2007, 12:01 PM	#27
72 cheyenne pdx Registered User Join Date: Nov 2006 Location: Portland Posts: 382	Re: 67 chevy lowrider project RHINO It is your truck. You can do what ever you want to it. I say go for it.

06-05-2007, 12:16 PM	#28
revn67 Registered User Join Date: Jul 2005 Location: east longmeadow, MA Posts: 540	Re: 67 chevy lowrider project RHINO spend the 1500 to 2000 on air suspension and then it'll be the start of your name for your project...lowrider, rhino sounds like a bad idea for anything but something that stays in the woods or on a mountain for a truck....bad idea __________________ 67 small windowed,shortbed,fleetside, sbc 327, th350,12 bolt :under the knife: 71 cab for sale in parts classifieds! 2004 black chevy 1500 "finish your beer, theres sober kids in india!"

06-05-2007, 01:39 PM	#29
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 67 chevy lowrider project RHINO Each to their own but, if you were a child, pet, student or spouse of mine, you'd get the rolled up newspaper treatment.... a little smack on the end of the nose and a resounding "nnno!" __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

06-05-2007, 05:42 PM	#31
68GMC454 THE VILLIAGE IDIOT Join Date: Nov 2006 Location: Tooele, Utah Posts: 1,405	Re: 67 chevy lowrider project RHINO interesting..if its already rusty,,then yes go for it..but i can tell you from experiance, you will spend alot of money and time to sand it back off...it took me almost a week to get just one door and fender sanded off,,the crap is hard on sand paper..personally on a 4x4,,it rocks,,,if its doen right, you shouldnt be able to tear it off..lol billy __________________ honestly honey,,i have no idea how that truck got here.

06-05-2007, 05:49 PM	#32
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: 67 chevy lowrider project RHINO My 2 cents. If you have your heart set on it and that's what you want, then by all means have at it. As long as you know what the consequences are if a year later you don't like it. Personally I agree with revn67, if it's gonna cost $1500 - 2500 like some of these guys think, that money would be (to me) better off spent in a nice suspension and wheels..,.......JB __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

06-05-2007, 08:22 PM	#33
dubs68SWB Registered User Join Date: Feb 2007 Location: Bend, OR Posts: 110	Re: 67 chevy lowrider project RHINO I apologize for my fellow truckers not using too much tact in telling you it is probably not a good idea. I also have a large network here in my city. I'm sure if you were to cut down on whatever it is you are shooting, smoking or drinking, we could sell the remainder and get you enough money for a real paint job. __________________ '68 Chevy SWB with 460 BBC Muncie M-22 and Eaton posi rear w/ 3.73's Corvette rallys with mini derby caps Sick horsepower and torque



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.