|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-08-2007, 12:56 PM
|
#1 |
|
Junior Member
Join Date: May 2007
Location: Milton, FL
Posts: 64
|
Disc Brake Proportional Valve
Will the proportional valve from a non-power brake system work with a power brake system?
Can I just install a booster behind the non-power master cylinder? I am installing a disc on my 69, and I am also going with power brakes. I have a master cylinder and prop. valve from a non-power 71. What do I need to complete this task? Thanks, Keith |
|
|
|
06-08-2007, 01:25 PM
|
#2 |
|
Semi-Senior Member
Join Date: Feb 2003
Location: Washington, MO
Posts: 390
|
Re: Disc Brake Proportional Valve
In theory, it shouldn't matter with the prop valve if it's power or not. The ports from the M/C have to installed correctly; smaller sized resevoir goes to the rears, larger goes to the front brakes. They've got to go to the right port on the prop valve.
I wouldn't have thought that the M/C would not be the same, power vs. non power, but NAPA only shows one M/C regardless of the option.
__________________
'68 50th Anniversery LWB Custom Fleetside, '77 305 v-8, turbo 350, factory speed alert (still works), '71 drivetrain w/front discs. Some call it ugly yellow, others call it Ochre '83 Jeep CJ-7, <80,000 miles, original owner '04 Chevy Suburban, 4x4, 2500, 6.0 ltr, Predator Diablo programmer '95 GMC K1500 Extended cab |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
