Gm Hydrolic Bellhousing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BCOWANWHEELS · 06-08-2007, 10:09 PM

I HAVE A NICE ALUMINUM HYDRAULIC BELLHOUSING FOR 10-11 AND 12" CLUTCHES, 5 1/8 CENTER HOLE FOR SM 435 OR NV4500 TRANS.
125.00 DELIVERED
BOB IN TN.
1 423 384 8938
BCOWANWHEELS@AOL.COM

454_72_4X4 · 06-09-2007, 01:30 AM

What year is it? Does it have the external slave cylinder mounted on the right or left? (Or is it the internal hydro throwout bearing design?)
The SM465 and early model NV4500 share the same center hole diameter, (5-1/8 in), but the bolt pattern is different between them.

BCOWANWHEELS · 06-09-2007, 11:13 AM

Slave Is On The Passenger Side.
Bob

06-08-2007, 10:09 PM	#1
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Gm Hydrolic Bellhousing I HAVE A NICE ALUMINUM HYDRAULIC BELLHOUSING FOR 10-11 AND 12" CLUTCHES, 5 1/8 CENTER HOLE FOR SM 435 OR NV4500 TRANS. 125.00 DELIVERED BOB IN TN. 1 423 384 8938 BCOWANWHEELS@AOL.COM

06-09-2007, 01:30 AM	#2
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: Gm Hydrolic Bellhousing What year is it? Does it have the external slave cylinder mounted on the right or left? (Or is it the internal hydro throwout bearing design?) The SM465 and early model NV4500 share the same center hole diameter, (5-1/8 in), but the bolt pattern is different between them. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

06-09-2007, 11:13 AM	#3
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Gm Hydrolic Bellhousing Slave Is On The Passenger Side. Bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.