F/S gauge parts tach,vac,air,80 lb oil ps tach/vac tins

[byrd]

I have some dash parts that I am not going to use and need some cash fo my project.
1) factory tach gauge, tested a few times works well,, was sticking at 2500 when I got it,but some cleaning and a little oil and it works fine now.The face of the tach has some imperfections and some surface rust stating to show thru the lines on the gauge, driver quality $100 shipped
2) 80 lb oil pressure gauge, nice working condition, has the same issuse with the face showing some surface rust on the lines, driver quality $45 shipped
3) Factory vacuum gauge, excellent working condition, and is very accurate. has the some surface rust issues with the lines on the face, these are pretty hard to find, driver quality $75 shipped Sold to windancer
4)2 factory air pressure gauges with tins, both work and have been tested as good by a fellow member, one is in fair condition need some help with the needle and the face, the other is in nice driver shape,but has the wrong needle on it, $25 for the fair on e shipped, and $35 for the nice one shipped
4) Factory Tach/vac or tach/air metal tins, these are the inner and outer metal tins needed to convert your dash over to a tach/vac or tach/air dash.
$95 shipped Sold to Billa pending payment
5)2 factory air pressure gauges with tins, both work and have been tested as good by a fellow member, one is in fair condition need some help with the needle and the face, the other is in nice driver shape,but has the wrong needle on it, $25 for the fair on e shipped, and $35 for the nice one shipped
6) Factory tach/vacuum lens, should polish up nice, no deep scratches or gouges, $20 shipped Sold to tkeduk8r
7) Factory tach dash printed circuit, super nice original condition, no seperating or hot,broken spots, new repop is $55, get an very hard to find original, for $75 shipped
7) Super nice almost NOS GM printed circuit for a dash without tach,but with gauges, This is the nicest one I have ever seen, could pass for NOS if it didn't have marks from being plugged in. Can out of a low milage survior, EXCELLENT, $50 shipped

REPLY HERE ONLY!!!! NO PM'S
All prices including shipping to the lower 48 only!! Al,Hi,Canada will be higher.

[byrd]

more pics

[byrd]

yrying to load some more pcs but it keeps saying invalid link specified??

[tkeduk8r]

Byrd,
Ill take the tach vac lens... shipped to 56308... thanks man... pm me with payment info please.,...
--Mike

[trkklr77]

stupid noob question, but what is the air presure? what is it refering to?

[byrd]

PM sent!

[byrd]

Originally Posted by trkklr77

stupid noob question, but what is the air presure? what is it refering to?

It was for the bigger truck that had air brakes, like the c-40,50 and 60's. People use them now nto monitor for their bag pressure when using air ride

[WinDancer]

I will take the vac guage, please
PM me paypal or snail mail address- thanks

[byrd]

PM sent

[jaros44sr]

I might be interested in a Air gauge lense, could you post up a pic. sometime? J.

[byrd]

Sorry J no can do, I don't have any of them. I still have not talked to my buddy Lamar, I think the last time we talked he had one. I will try to get up with him this week and LYK what I find.

Randy

[jaros44sr]

Originally Posted by byrd

Sorry J no can do, I don't have any of them. I still have not talked to my buddy Lamar, I think the last time we talked he had one. I will try to get up with him this week and LYK what I find.

Randy

Thanks, just let me know if something shows up. J.

[byrd]

ttt

[Billla]

Byrd, thanks for posting on my WTB thread so I didn't miss this! I'll take one set of Tach/Vac tins described below - THANKS! BTW, I have the oval rear piece for the vac gauge (the one with the stamped holes in it) so if you want to keep that piece for someone else, be my guest

BTW, I appreciated your resto quote; I picked up a tach dash in really nice shape and decided it was better than driver quality...so I just decided to put it together myself.

4) Factory Tach/vac or tach/air metal tins, these are the inner and outer metal tins needed to convert your dash over to a tach/vac or tach/air dash.
$95 shipped

[byrd]

Billa PM sent!

[byrd]

last chance anybody want to make an offer on this stuff before ebay? all unsold pieces will go up on ebay sunday.....Randy

[trkklr77]

what is needed to get the air psi setup in my tach dash? just the guage and tin? circut board?

[byrd]

Originally Posted by trkklr77

what is needed to get the air psi setup in my tach dash? just the guage and tin? circut board?

If you have a tach dash, all you need is the inner black tin, and the gauge with the back panel, or if you don't have the small back panel for a vac/air gauge you can just drill out the square stamped spot in the middle to 1/2" and it will pop right in. But the tough part to find is a good used air pressure lens for the dash that is nice enough to polish out, as they are not being reproduced.

[WinDancer]

I bought the vac guage- di I need other parts to install it in my tac dash?

[byrd]

windancer, yes you will, same as above you need the inner tin and the lens. The inner tins are hard to find and are not be repopped except in tach/vac conversion kits. Billa bought the set I had for sale. BTW your vac gauge went out yesterday and you should see it in a couple of days...Randy