Wheel Dolly? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 12-10-2002, 01:13 AM

Last weekend or the week before on Hot Rod TV, Dream Car Garage or one of those shows they demostrated a wheel dolly that included a hydraulic jack that jacked the two sides together under the tire thereby elminating the need to use a separate jack to lift the tire off the ground. Did anyone catch the name of the company that builds these. I need to purchase some for another project. Anyone know what I am talking about?

Thanks in advance.

cableguy0 · 12-10-2002, 01:27 AM

all u need to do is get yourself a set of go jacks they are ratcheting with no hydraulics or anything u put em around the tire and then pump the lever with your foot. snap on makes em as well as a few otehr companies. i used to use em all the time when i reposessed cars

stllookn · 12-10-2002, 01:35 AM

Thanks, I looked them up on the Snap-On site and it looks close enough.

tim m · 12-10-2002, 10:31 AM

I picked up a set from Harbor freight, they were 39 a set. They're not the best quality but they were a lot cheaper than the snap-on ones.

12-10-2002, 01:13 AM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Wheel Dolly? Last weekend or the week before on Hot Rod TV, Dream Car Garage or one of those shows they demostrated a wheel dolly that included a hydraulic jack that jacked the two sides together under the tire thereby elminating the need to use a separate jack to lift the tire off the ground. Did anyone catch the name of the company that builds these. I need to purchase some for another project. Anyone know what I am talking about? Thanks in advance. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

12-10-2002, 01:27 AM	#2
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	all u need to do is get yourself a set of go jacks they are ratcheting with no hydraulics or anything u put em around the tire and then pump the lever with your foot. snap on makes em as well as a few otehr companies. i used to use em all the time when i reposessed cars __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

12-10-2002, 01:35 AM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Thanks, I looked them up on the Snap-On site and it looks close enough. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

12-10-2002, 10:31 AM	#4
tim m Registered User Join Date: Mar 2001 Location: Gilbert Az Posts: 286	I picked up a set from Harbor freight, they were 39 a set. They're not the best quality but they were a lot cheaper than the snap-on ones. __________________ 1970 k10 1971 C10 Gilbert Az



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.