BIG J, Door opening Measurements. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RustyParts · 04-19-2007, 08:50 PM

I hope this picture is clear enough,I had to take the door off to get a good shot of the opening. The arrows are pointing to the locations I used for the measurements. Good luck.

The bottom measurement should be 35-7/8", My Bad.

vtblazer · 04-20-2007, 06:34 AM

Thanks! Perfect timing.

I'm starting my tube doors this weekend and taking measurements from the other blazer was on the 'to do' list but you just saved me the time.

Another place to find the measurements is in the factory service manual, in case anybody was wondering.

Critter · 04-20-2007, 10:29 AM

I was about to ask this question actually! I Installed new Poly Body mounts a couple of months ago and I wanted to double check my work.

**jamie72** · 04-20-2007, 04:35 PM

this would be good in the faq board!!!

LUV2XCLR8 · 04-20-2007, 09:23 PM

Big J · 04-21-2007, 10:52 PM

Thanks Rusty.... That is some awesome stuff right there. Helps a whole bunch.... This gets my vote to go in the faq section...

vtblazer · 04-23-2007, 02:35 PM

Hey Rusty, any chance the bottom measurement of 33-7/8" should be 35-7/8"?

Just checking...

DURRTY · 06-14-2007, 02:32 AM

right?? maybe his aren't perfectly straight I have a factory assembly manual and they draw a straight line down for the measurement, not showing a difference in length Ill have to check it out again

fun in dirt · 06-14-2007, 07:44 AM

Quote:

Originally Posted by DURRTY

right?? maybe his aren't perfectly straight I have a factory assembly manual and they draw a straight line down for the measurement, not showing a difference in length Ill have to check it out again

Yes please compare these w/ your manual. Cause mine doesn't near 'bout match up

vtblazer · 06-14-2007, 07:48 AM

Quote:

Originally Posted by fun in dirt

Yes please compare these w/ your manual. Cause mine doesn't near 'bout match up

It's correct (Rustys pic) other than the last measurement I questioned about.

DURRTY · 06-14-2007, 03:04 PM

Ill take a look at it tonight and scan the page(s) and post them. I have only thumbed the manual so far and have not spent much time actually reading it. I guess I need to put it on top of the crapper. LOL maybe then i can study it.

LUV2XCLR8 · 06-14-2007, 03:44 PM

Good pic to have, right click and save

DURRTY · 06-15-2007, 02:28 AM

OK here are a couple scans from the book. if you can make more sense out of them than I let me know LOLOL I have not read the thing cover to cover I just got it and have not spent allot of time with it. If i find more on the doors Ill post it up.

RustyParts · 06-15-2007, 08:58 AM

Quote:

Originally Posted by vtblazer

Hey Rusty, any chance the bottom measurement of 33-7/8" should be 35-7/8"?

Just checking...

Yor right, I must have thinking one thing and typing something else, my bad.

04-19-2007, 08:50 PM	#1
RustyParts Registered User Join Date: May 2006 Location: Wyman, Kentucky Posts: 403	BIG J, Door opening Measurements. I hope this picture is clear enough,I had to take the door off to get a good shot of the opening. The arrows are pointing to the locations I used for the measurements. Good luck. The bottom measurement should be 35-7/8", My Bad. Attached Images __________________ 1972 GMC Jimmy, 4WD, 454 CI, 350 Turbo, 4" lift, 35" tires The math teacher said my son "Bubba" could be a mathmatical genius. cause he's got 13 fingers! Last edited by RustyParts; 06-15-2007 at 08:56 AM.

04-20-2007, 06:34 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: BIG J, Door opening Measurements. Thanks! Perfect timing. I'm starting my tube doors this weekend and taking measurements from the other blazer was on the 'to do' list but you just saved me the time. Another place to find the measurements is in the factory service manual, in case anybody was wondering.

04-20-2007, 10:29 AM	#3
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: BIG J, Door opening Measurements. I was about to ask this question actually! I Installed new Poly Body mounts a couple of months ago and I wanted to double check my work. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

04-20-2007, 04:35 PM	#4
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: BIG J, Door opening Measurements. this would be good in the faq board!!! __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-20-2007, 09:23 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: BIG J, Door opening Measurements. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-21-2007, 10:52 PM	#6
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: BIG J, Door opening Measurements. Thanks Rusty.... That is some awesome stuff right there. Helps a whole bunch.... This gets my vote to go in the faq section... __________________ BAZINGA! My Build

04-23-2007, 02:35 PM	#7
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: BIG J, Door opening Measurements. Hey Rusty, any chance the bottom measurement of 33-7/8" should be 35-7/8"? Just checking...

06-14-2007, 02:32 AM	#8
DURRTY USMC Join Date: May 2007 Location: SLc,UT Posts: 300	Re: BIG J, Door opening Measurements. right?? maybe his aren't perfectly straight I have a factory assembly manual and they draw a straight line down for the measurement, not showing a difference in length Ill have to check it out again __________________ Semper Fi

06-14-2007, 03:04 PM	#11
DURRTY USMC Join Date: May 2007 Location: SLc,UT Posts: 300	Re: BIG J, Door opening Measurements. Ill take a look at it tonight and scan the page(s) and post them. I have only thumbed the manual so far and have not spent much time actually reading it. I guess I need to put it on top of the crapper. LOL maybe then i can study it. __________________ Semper Fi

06-14-2007, 03:44 PM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: BIG J, Door opening Measurements. Good pic to have, right click and save __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-15-2007, 02:28 AM	#13
DURRTY USMC Join Date: May 2007 Location: SLc,UT Posts: 300	Re: BIG J, Door opening Measurements. OK here are a couple scans from the book. if you can make more sense out of them than I let me know LOLOL I have not read the thing cover to cover I just got it and have not spent allot of time with it. If i find more on the doors Ill post it up. Attached Images __________________ Semper Fi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.