The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-23-2007, 11:54 PM   #1
eaglelox
Member Dude
 
eaglelox's Avatar
 
Join Date: Aug 2003
Location: reno,nv,usa
Posts: 191
new headers and glasspack ?

hi guys. i have a 350, Non ERG EDELBROCK PERFORMER INTAKE MANIFOLD 2104. EDELBROCK 1406, HEI. my headers have a 3" out. i want too put glass packs on. what will give me more HP at low RPM's. dual or single pipes, 2.25, 2.5 or 3" pipes or. i have read that the larger the better. i also read i need some restriction or back pressure to help with scavaging at low RPM"s.

Got gas, need help. Thanks.
__________________
Steve

1978 K20 Burb, 4" lift, 33's, 350
Eaglelox@Hotmail.com

Last edited by eaglelox; 05-24-2007 at 07:13 PM.
eaglelox is offline   Reply With Quote
Old 05-25-2007, 03:44 AM   #2
Ivan D.
glamoros piece o' lowlife
 
Ivan D.'s Avatar
 
Join Date: Mar 2007
Location: Redford, MI
Posts: 1,164
Re: new headers and glasspack ?

Best scavenging effect and best torque for a mild 350 would be through the header you got now, then some 2.5" piping, then a Flowmaster Y-collector with dual 2.5" inlets and a single 3" outlet, then a single exhaust to a 3"-in-2.5"-out muffler, then a 2.5" tail after the muffler. If I weren't as broke as I'm I'd have done just that, only instead of muffler and tailpipe I'd run the 3" pipe from the Y-collector back to the beginning of the bed and then up behind the cab with a tractor flapper valve on top

Dual 2.5" exhaust is fine too, that's what I just put in like a week or so ago, ran me about $100 for two S-pipes, two turbo mufflers three extension pipes (one per side plus one cut in half to become the tips) and 6 clamps and 2 hangers - looks good, sounds good, and oddly enough clears everything.

Dual 2.25" is what stock Mustangs run, and those got 302s and not 351s, so 2.25" is a little on the small side for yer 350. Dual 3" is way too much, that's what the guys with the big blocks run, unless you have a blower of some kind on that 350 a dual 3" system will actually work against you.
__________________
The more I drink, the more I drink, the more I drink...
diesel, reg cab, long bed, 4 across the rear, single stack, wooden stakes, and lotsa lights - the Hay Express
Ivan D. is offline   Reply With Quote
Old 05-25-2007, 12:50 PM   #3
eaglelox
Member Dude
 
eaglelox's Avatar
 
Join Date: Aug 2003
Location: reno,nv,usa
Posts: 191
Re: new headers and glasspack ?

thanks Ivan
__________________
Steve

1978 K20 Burb, 4" lift, 33's, 350
Eaglelox@Hotmail.com
eaglelox is offline   Reply With Quote
Old 06-13-2007, 09:44 PM   #4
edflores
Registered User
 
Join Date: Jul 2005
Location: Riverside CA
Posts: 860
Re: new headers and glasspack ?

4x4 or 2wd? what tranny do you have? i have a single on my 2wd but i think some duals woud wake it up.
edflores is offline   Reply With Quote
Old 06-15-2007, 10:59 AM   #5
Zoomad75
K5Camper
 
Zoomad75's Avatar
 
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
Re: new headers and glasspack ?

Just say no to glasspacks. I've got a pair on my Blazer thanks to the PO and can't wait to chuck them into a can. I can't imagine a more obnoxious muffler other than the fart cannons on the sport compact stuff. Even worse when the glasspacks are "blown out" like mine are. The popping/crackling and backfires (bang!) might have been cool when I was 16 but they are just annoying now.

There are much better mufflers out there. I'll end up either putting some basic turbo mufflers on or cheap flowmaster knock-off mufflers. 2 1/2" pipe and might even ditch the headers for stock manifolds as I'm tired of replacing collecter gaskets.

If I can make it sound like my 69 Nova with 2 1/2 duals running through turbo II muffler's I'd be a happy camper. It's got a nice throaty burble at idle, semi quiet when crusing and flat out yells when you stand on the skinny pedal. One of the guys that helped install that system was pushing hard for me to use glasspacks and then to purposely blow them out so I had nothing more than straight exhaust. I said NO WAY as I didn't want it to be a cop magnet.
__________________
Rob Z.
1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP
1991 K5 8.1L/NV4500/241/D44/14b FWC Camper
Zoomad75 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:29 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com