Need a pic of hardtop bracket Bolt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Luis_gz06 · 06-05-2007, 03:54 AM

Can someone post a pic of the ORIGINAL Blazer hardtop front bracket bolts!

Here's a pic of what im talking about. Thanks.

**Yukon Jack** · 06-05-2007, 10:18 AM

Mine has the phillips head style bolt where your hex head bolt is located.

jfortner · 06-05-2007, 11:01 AM

Mine has studs where your bolt is. There is then a nut that holds the bracket on the stud. Looks stock on mine? 1971 K5, but I think it might have been a Canadian vehicle?

Luis_gz06 · 06-05-2007, 02:26 PM

Any pix??

bouncytruck · 06-05-2007, 02:56 PM

Mine has philips head screws too. But I don't have a picture.

LUV2XCLR8 · 06-05-2007, 03:05 PM

X3 Phillips Head

5/8" Head Width
3/4" Thread Length
5/16-18 Threads

**Steven B** · 06-05-2007, 03:31 PM

Phillips head all 3

Luis_gz06 · 06-05-2007, 04:04 PM

Ok, I guess that helps! Now are those phillips head bolts the same as the ones you put underneath the top? Its a doublewall top. Thanks!

RED72blazer · 06-05-2007, 10:12 PM

Quote:

Originally Posted by Luis_gz06

Ok, I guess that helps! Now are those phillips head bolts the same as the ones you put underneath the top? Its a doublewall top. Thanks!

my double wall uses the same bolt for the windshield and on the sides. both are the same now...probably not original.

jkade · 06-06-2007, 08:47 AM

Mine used the same bolts as the sides also.

DURRTY · 06-06-2007, 02:46 PM

here is all i have left on mine..... these 2 and 1 C-clamp was all that was holding the top on hope this is it

LUV2XCLR8 · 06-06-2007, 03:14 PM

Quote:

Originally Posted by Luis_gz06

Now are those phillips head bolts the same as the ones you put underneath the top?

If you mean under the bed rails? Then No, they are quite a bit different on mine

bouncytruck · 06-06-2007, 04:03 PM

Quote:

Originally Posted by DURRTY

here is all i have left on mine..... these 2 and 1 C-clamp was all that was holding the top on hope this is it

What is in your photo just holds on the top of the door weatherstriping. They don't hold any part of the hard top in place. The outside front corners of the top are held in place by a long bolt running through the Blazer/Jimmy exclusive sunvisor brackets and into a threaded insert in the top.

I think you only had a c-clamp and gravity holding your top on...

Luis_gz06 · 06-07-2007, 01:58 PM

Quote:

Originally Posted by LUV2XCLR8

If you mean under the bed rails? Then No, they are quite a bit different on mine

Do you know the bolt size for the under bed rails??

Luis_gz06 · 06-11-2007, 10:51 AM

ttt

Luis_gz06 · 06-14-2007, 02:09 PM

Quote:

Originally Posted by Luis_gz06

Do you know the bolt size for the under bed rails??

No one knows this answer? I guess no one likes me on this board.

LUV2XCLR8 · 06-14-2007, 02:39 PM

Sorry, like I said in another post related to this one, I do not use them I
only use the 2 at the front in the middle, and the 2 brackets in the rear.

**Classic Heartbeat** · 06-14-2007, 07:19 PM

They are 5/16" body bolts. WES

Luis_gz06 · 06-15-2007, 12:23 AM

Thanks Wes! And Luv, thats alright, no trip.

BobbyK · 06-20-2007, 11:07 PM

He's what 's on my 71.
I make sure I lube the threads with anti-seize compound as they are a b@tch to get out if they are rusted.

Luis_gz06 · 06-21-2007, 01:53 PM

Quote:

Originally Posted by BobbyK

He's what 's on my 71.
I make sure I lube the threads with anti-seize compound as they are a b@tch to get out if they are rusted.

Thanks for the pic! And yes, there a pain to get them out when it's rusted.

06-05-2007, 03:54 AM	#1
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Need a pic of hardtop bracket Bolt Can someone post a pic of the ORIGINAL Blazer hardtop front bracket bolts! Here's a pic of what im talking about. Thanks. Attached Images

06-05-2007, 10:18 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Need a pic of hardtop bracket Bolt Mine has the phillips head style bolt where your hex head bolt is located. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-05-2007, 11:01 AM	#3
jfortner Registered User Join Date: May 2007 Location: Everett, WA Posts: 45	Re: Need a pic of hardtop bracket Bolt Mine has studs where your bolt is. There is then a nut that holds the bracket on the stud. Looks stock on mine? 1971 K5, but I think it might have been a Canadian vehicle?

06-05-2007, 02:26 PM	#4
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Need a pic of hardtop bracket Bolt Any pix??

06-05-2007, 02:56 PM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Need a pic of hardtop bracket Bolt Mine has philips head screws too. But I don't have a picture. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

06-05-2007, 03:05 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Need a pic of hardtop bracket Bolt X3 Phillips Head 5/8" Head Width 3/4" Thread Length 5/16-18 Threads __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-05-2007, 03:31 PM	#7
Steven B Senior Member Join Date: Jan 2000 Location: LHC, AZ Posts: 385	Re: Need a pic of hardtop bracket Bolt Phillips head all 3 __________________ 70 Jimmy 4x4 71 GMC 2500 Too bad stupidity isn't painful

06-05-2007, 04:04 PM	#8
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Need a pic of hardtop bracket Bolt Ok, I guess that helps! Now are those phillips head bolts the same as the ones you put underneath the top? Its a doublewall top. Thanks!

06-06-2007, 08:47 AM	#10
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Need a pic of hardtop bracket Bolt Mine used the same bolts as the sides also.

06-06-2007, 02:46 PM	#11
DURRTY USMC Join Date: May 2007 Location: SLc,UT Posts: 300	Re: Need a pic of hardtop bracket Bolt here is all i have left on mine..... these 2 and 1 C-clamp was all that was holding the top on hope this is it Attached Images __________________ Semper Fi

06-11-2007, 10:51 AM	#15
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Need a pic of hardtop bracket Bolt ttt

06-14-2007, 02:39 PM	#17
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Need a pic of hardtop bracket Bolt Sorry, like I said in another post related to this one, I do not use them I only use the 2 at the front in the middle, and the 2 brackets in the rear. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-14-2007, 07:19 PM	#18
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Need a pic of hardtop bracket Bolt They are 5/16" body bolts. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

06-15-2007, 12:23 AM	#19
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Need a pic of hardtop bracket Bolt Thanks Wes! And Luv, thats alright, no trip.

06-20-2007, 11:07 PM	#20
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Need a pic of hardtop bracket Bolt He's what 's on my 71. I make sure I lube the threads with anti-seize compound as they are a b@tch to get out if they are rusted. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 06-20-2007 at 11:08 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.