wanted p/s pulley for 350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**STP67-72** · 07-03-2007, 07:27 AM

I need a p/s pulley for a 69-72 chevy truck. I have the flat one with no off set. I think it fits a 307. I will consider taking a complete pump set up. I need one for a 350. Thanks....

**STP67-72** · 07-04-2007, 09:03 AM

ttt

WORNBRAKES · 07-04-2007, 04:08 PM

I have the whole set up here that came with the 350 I put in the blaz. I took it off because the blaz had one attached to the steering box. It worked fine in my buddies truck I bought the engine from. It is here in this link
http://67-72chevytrucks.com/vboard/s...d.php?t=239716

jorgensensc · 07-04-2007, 04:17 PM

I was just in the same situation. I went to the lacal J-yard and paid 17.00 for a used pump and pulley and hoses. I figured the pump was worth 10.00 as a core if I needed a new one and the pulley was worth 7.00. Check locally at the j-yards.

07-03-2007, 07:27 AM	#1
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,666	wanted p/s pulley for 350 I need a p/s pulley for a 69-72 chevy truck. I have the flat one with no off set. I think it fits a 307. I will consider taking a complete pump set up. I need one for a 350. Thanks.... __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

07-04-2007, 09:03 AM	#2
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,666	Re: wanted p/s pulley for 350 ttt __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

07-04-2007, 04:08 PM	#3
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: wanted p/s pulley for 350 I have the whole set up here that came with the 350 I put in the blaz. I took it off because the blaz had one attached to the steering box. It worked fine in my buddies truck I bought the engine from. It is here in this link http://67-72chevytrucks.com/vboard/s...d.php?t=239716 __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

07-04-2007, 04:17 PM	#4
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: wanted p/s pulley for 350 I was just in the same situation. I went to the lacal J-yard and paid 17.00 for a used pump and pulley and hoses. I figured the pump was worth 10.00 as a core if I needed a new one and the pulley was worth 7.00. Check locally at the j-yards. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.