Mounting questions for 3rd-row seat

[NuBomb]

I finally got a suburban 3rd row seat for my blazer. It is from a 96-99 suburban. I know somebody has already done it, but can't find a post. I want to mount the seat using a square steel subfloor. Can the cups that the seat goes into still be bought from GM or would I have to do some cutting at a junkyard. Any suggestions would be appreciated. Thanks, Jeremy

[JWPOORE]

Here they are on Ebay: http://cgi.ebay.com/ebaymotors/Chevy...spagenameZWDVW

This might be the person you were referring to as a install example: http://1972c5.com/blazer_pages/pics_...eriorpics.html

[crzngmychvy]

That's my truck in the link. Let me know what I can help you with and I'll try my best. The install is pretty straight forward, I bought those brackets off ebay too.

[NuBomb]

That is exactly what I needed. Thanks for the links. I haven't seen your site before crzn, it's great. It may be a while before I can get to it, but I'll probably do the same thing you did. Did you have to drop the tank or anything when you did the welding for the brackets? How about support under the floor? Your blazer looks great btw.

Jeremy

[crzngmychvy]

Originally Posted by NuBomb

That is exactly what I needed. Thanks for the links. I haven't seen your site before crzn, it's great. It may be a while before I can get to it, but I'll probably do the same thing you did. Did you have to drop the tank or anything when you did the welding for the brackets? How about support under the floor? Your blazer looks great btw.

Jeremy

I did drop the tank, but I don't think you really have to, just be careful. Also watch out for the lines under the bed. Keep us informed how it goes.