k5 bedside question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tallhoedude · 07-16-2007, 01:07 PM

i have found some undesirable things under the bondo on the right bedside on my k5.looks like it made contact with a pole at one time and has been cut and patched back together.......very poorly
i really just need the back half of the panel,but top to bottom....and really only want the outside skin,not the whole bedside panel..
my question is....can i just use a truck bedside to patch with?
ive got a shortbed i could cut up....or do i need a blazer side...??
thanks in advance for any guidance...

Musclerodz · 07-16-2007, 01:10 PM

Quote:

Originally Posted by tallhoedude

i have found some undesirable things under the bondo on the right bedside on my k5.looks like it made contact with a pole at one time and has been cut and patched back together.......very poorly
i really just need the back half of the panel,but top to bottom....and really only want the outside skin,not the whole bedside panel..
my question is....can i just use a truck bedside to patch with?
ive got a shortbed i could cut up....or do i need a blazer side...??
thanks in advance for any guidance...

That area should be the same. The only difference I know of is up front where the bed side attaches to the door jamb.

Mike

tallhoedude · 07-16-2007, 01:16 PM

Thanks,
Do You Guys Sell A Bedside Skin?or Half Panel?

Is The Length From Wheel Opening To Taillamps The Same On Shortbeds And Blazers?

Thanks Again

Musclerodz · 07-16-2007, 03:13 PM

Quote:

Originally Posted by tallhoedude

Thanks,
Do You Guys Sell A Bedside Skin?or Half Panel?

Is The Length From Wheel Opening To Taillamps The Same On Shortbeds And Blazers?

Thanks Again

Wheel opening to tail is the same on both. Unless you get a used bedside to fix it with or a complete bedside, the largest panel I know of is the complete wheel arch which is 30" each way from the center of the wheel arch and 23" high from the bottom. I can get that repair panel.

Mike

LUV2XCLR8 · 07-16-2007, 03:31 PM

Wait till spring and I will have a set of rear bed sides on the market

tallhoedude · 07-16-2007, 04:25 PM

spring!!!! thats like an eternity for my impatient self

no chance of earlier...plus im only gonna need one.

thanks for the input...ill keep on the lookout...kind of hate to cut up my shortbed for a bedside and some floor patches.but its just turning into a big flower pot in my backyard..

anyhow,thanks again to everyone

07-16-2007, 01:07 PM	#1
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	k5 bedside question i have found some undesirable things under the bondo on the right bedside on my k5.looks like it made contact with a pole at one time and has been cut and patched back together.......very poorly i really just need the back half of the panel,but top to bottom....and really only want the outside skin,not the whole bedside panel.. my question is....can i just use a truck bedside to patch with? ive got a shortbed i could cut up....or do i need a blazer side...?? thanks in advance for any guidance... __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

07-16-2007, 01:16 PM	#3
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: k5 bedside question Thanks, Do You Guys Sell A Bedside Skin?or Half Panel? Is The Length From Wheel Opening To Taillamps The Same On Shortbeds And Blazers? Thanks Again __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

07-16-2007, 03:31 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: k5 bedside question Wait till spring and I will have a set of rear bed sides on the market __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-16-2007, 04:25 PM	#6
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: k5 bedside question spring!!!! thats like an eternity for my impatient self no chance of earlier...plus im only gonna need one. thanks for the input...ill keep on the lookout...kind of hate to cut up my shortbed for a bedside and some floor patches.but its just turning into a big flower pot in my backyard.. anyhow,thanks again to everyone __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.