The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-12-2007, 03:26 PM   #1
SactoJim
Registered User
 
SactoJim's Avatar
 
Join Date: Oct 2005
Location: Sacramento, CA
Posts: 1,970
Rear End Widths Clarified

SO....all earlier trucks 67, 68, (what's the cut off?) had 6 lug axles...period....and those 6 lug rearends were a bit narrower than the later 5 lug rears (1" or..?). So they changed to 5 lug (what year?) and the rear end is a little wider and 6 lug was only for 4wd...correct?

So in order to have the narrower rearend, it had to be from an early 6 lug truck and if you want 5 lug, you have to have the axle flanges redrilled?

So is it safe to say that from 67-72 there were just 2 rear ends (1/2 ton) available...early (6 lug) and later (5 lug)?
__________________
72 Cheyenne SWB Fleet
Nut & bolt frame off in progress...99.9999%
- supercharged 383
- 4 wheel discs
- relocated fuel tank
-

My Build Thread
SactoJim is offline   Reply With Quote
Old 06-12-2007, 03:44 PM   #2
1969k10stepside
Registered User
 
Join Date: Mar 2006
Location: USA
Posts: 21,020
Re: Rear End Widths Clarified

1967-1970 2wd had 6 lug rears on the 1/2 ton.They are narrower than the newer late 70-72s.In 1971 they went to discs w/ 5 lug front and rear.Rear axle was wider like late 70 model year rear axle.In 70 (still 6 lugs) there was some rear axles that were wider like the 71+ 5 lug rear axles.The 3/4 tons were 8 lug all through 67-72.I don't think the 3/4 tons switched to a wider axle like the 1/2 tons,in late 70. So,3 types...67-70 6 lug narrow version.70 6 lug rear with wider rear axle.71+ with 5 lug axles that are wider like the late 70s 6 lug. 1/2 ton 4wd was 6 lug 67-72.

Last edited by 1969k10stepside; 06-12-2007 at 04:21 PM. Reason: spelling
1969k10stepside is offline   Reply With Quote
Old 06-12-2007, 04:08 PM   #3
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: Rear End Widths Clarified

My 68 K-10 had a narrower 12 bolt than the 69-70 C-10 12 Bolt that I am installing now. It was about 1.5" narrower. I can get exact dimension if anyone needs them. Both are 6 lug axles...
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 06-12-2007, 04:18 PM   #4
itsmike2k
Registered User
 
Join Date: Apr 2007
Location: Vegas
Posts: 225
Re: Rear End Widths Clarified

I measured my 72 5lug c-10 a week or so ago and the housing from outside of the drum to outside drum was 63 3/4" if that help anyone.. I know the mounting surface is almost dead center of the tubs, atleast by the measurements i have gathered, i dont have a bed yet .. Guess thats why a zero offset wheels works so good on these trucks...
__________________
Mike
1972 LT1/4l60e Short Bed
ART Front and Rear Strong Arms
http://www.67-72chevytrucks.com/vboa...50#post2151750
itsmike2k is offline   Reply With Quote
Old 06-12-2007, 05:51 PM   #5
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,818
Re: Rear End Widths Clarified

There is about 1.5" difference overall. Just depends on how accurate you measure. Some where in the 1970 model year is when the change occurred. My 70 was bought new in Sept 1970, so it was probably one near the end of the runs. I have heard that the change occurred on those assembled sometime after Jan 1970
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 07-16-2007, 01:53 PM   #6
VDOG
Grand PooBaa Member
 
VDOG's Avatar
 
Join Date: Jan 2001
Location: LA, CA
Posts: 5,302
Re: Rear End Widths Clarified

I have a chance to buy a rearend with a posi in it. The guy said its a 72 with 6 lugs amd it was converted to leaf springs. I told him 70 was the last year for 6 lugs he had it under his 56 chevy truck. He lives too far from me to just go and view it and not make a purchase, so are there any marking that will tell me what year it is?
VDOG is offline   Reply With Quote
Old 07-16-2007, 07:36 PM   #7
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: Rear End Widths Clarified

It could be from 4WD, but you said "converted" to leaf...

If he wants to sell it then he owes you a pic of the "guts", only way to be sure....
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com