NP205 Idler Shaft Shims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rust Buster · 07-15-2007, 09:24 PM

Does anyone know where I can buy just the shims for the idler shaft on my NP205? I bought the rebuild kit but they are not included, and the ones I took out are toast. I see I can get a whole other rebuild kit that includes the shims, but its almost $300.

Anyplace just sell the shims?

**kwmech** · 07-16-2007, 10:12 AM

Last bunch of shims I got was from the local gm dealer, they are getting scarce

OLDCHEV4X4 · 07-16-2007, 12:09 PM

Try 4x4heaven in NY. They always had any np205 part I wanted.

blink32 · 07-16-2007, 03:08 PM

http://4xheaven.com/

Musclerodz · 07-16-2007, 03:19 PM

I found a local guy that has quite a few used 205 parts. I am sure he probably has some.

Mike

chipflyer · 07-16-2007, 11:02 PM

I got some at at local transmission repair shop. Any good shop wil have them.

Jeff

07-15-2007, 09:24 PM	#1
Rust Buster Registered User Join Date: Apr 2007 Location: Virginia Posts: 547	NP205 Idler Shaft Shims Does anyone know where I can buy just the shims for the idler shaft on my NP205? I bought the rebuild kit but they are not included, and the ones I took out are toast. I see I can get a whole other rebuild kit that includes the shims, but its almost $300. Anyplace just sell the shims? __________________ Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487

07-16-2007, 10:12 AM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	Re: NP205 Idler Shaft Shims Last bunch of shims I got was from the local gm dealer, they are getting scarce

07-16-2007, 12:09 PM	#3
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: NP205 Idler Shaft Shims Try 4x4heaven in NY. They always had any np205 part I wanted. __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

07-16-2007, 03:08 PM	#4
blink32 Registered User Join Date: Dec 2003 Location: OTR Posts: 338	Re: NP205 Idler Shaft Shims http://4xheaven.com/

07-16-2007, 03:19 PM	#5
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,364	Re: NP205 Idler Shaft Shims I found a local guy that has quite a few used 205 parts. I am sure he probably has some. Mike __________________ Mike Redpath

07-16-2007, 11:02 PM	#6
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: NP205 Idler Shaft Shims I got some at at local transmission repair shop. Any good shop wil have them. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.